- Out-of-Stock
zł971.80
AVT517 A +
ID: 193822
RADIO REMOTE CONTROLLING SYSTEM WITH CHANNEL - CONTINUOUS PLATE AND PROGRAMMED SYSTEM
RADIO REMOTE CONTROLLING SYSTEM WITH CHANNEL - CONTINUOUS PLATE AND PROGRAMMED SYSTEM
Producer: AVT
The system includes a transmitter and a receiver. This allows you to control two servos and two ON / OFF outputs. An interesting option is to work with the return channel (transferring data from the receiver to the transmitter). The device is easy to assemble. The CC1000PP radio modules based on the Chipcon chipset were used as a radio part. The use of a ready-made radio track radically simplified (and in principle eliminated) the tuning process. The modules enable bidirectional data transmission. Thanks to this, it is possible to prepare a channel allowing the operator to follow the changes appearing in the receiving part. The transmitter has two types of keypads. Potentiometers are used to control the servos. The ON / OFF channels are controlled by traditional switches. At the output of the receiver there are connectors for connecting typical servos and OC type outputs for controlling eg relays.
The device is especially recommended for two-way data transmission, in modeling and in local telemetric systems
Selected parameters:
- radio part - ready radiomodems CC1000PP
- frequency of the connection - 433 MHz
- power 10 mW, digital coding
- two analog channels + two ON / OFF channels
- return channel ON / OFF
- control of the power supply voltage of the transmitter and receiver
- sound signaling
- power supply - 4.5-9 V (transmitter / receiver)
- in the set, printed circuit boards, programmed layouts and documentation
- Detailed description in
Download
193822
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
No product available!
KAmodMIC_MEMS is a module with a microphone type SPV1840LR5H-B. Thanks to the built-in amplifier with 100-fold signal amplification, the voltage at the module output can be measured using, for example, an ADC converter
Retired
No product available!
The CY8CKIT-049-42xx Prototyping Kit is a low cost prototyping platform for customers wishing to test and develop applications using the PSoC® 4 device family. CY8CKIT-049-42XX
Retired
No product available!
No product available!
No product available!
The general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3108
Retired
No product available!
The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3109
Retired
No product available!
This version has a 56:1 metal gearbox with a 0.276"-long, 4 mm-diameter D-shaped output shaft. Key specs at 6 V: 250 RPM and 250 mA free-run, 45 oz-in (3.3 kg-cm) and 3.3 A stall. Pololu 1450
Retired
No product available!
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
The UM7 orientation sensor from CH Robotics is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. Pololu - 2741
Retired
No product available!
The A-Star 32U4 Mini SV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-down regulator that allows it to be powered efficiently from a 5 V to 36 V supply. Pololu 3104
Retired
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 6 A.
Retired
No product available!
High performance full NFC compliant expansion board compatible with Raspberry Pi. EXPLORE-NFC
Retired
No product available!
SATA line for Banana Pi only. Connects a 2.5 inch Hard Disk to your Banana Pi Computer
Retired
No product available!
No product available!
This is an aluminum heat-sink for the Banana Pi RAM Chips. Run cool RAM chips with this little add-on. Just one heat-sink is needed to cover both RAM chips, use the picture below as reference. Signs of RAM or CPU overheating are computer stops responding, frozen screen and power shutt down or cycling.
Retired
No product available!
RADIO REMOTE CONTROLLING SYSTEM WITH CHANNEL - CONTINUOUS PLATE AND PROGRAMMED SYSTEM