- Out-of-Stock

These 2×2-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: it’s not easy to get the wires back out, so plan carefully!).
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other; you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy:
|
|
![]() |
![]() |
Pins | A (mm) | B (mm) |
---|---|---|
1×1 | – | 2.54 |
1×2 | 2.54 | 5.08 |
1×3 | 5.08 | 7.62 |
1×4 | 7.62 | 10.16 |
1×5 | 10.16 | 12.70 |
1×6 | 12.70 | 15.24 |
1×7 | 15.24 | 17.78 |
1×8 | 17.78 | 20.32 |
1×9 | 20.32 | 22.86 |
1×10 | 22.86 | 25.40 |
1×12 | 27.94 | 30.48 |
1×16 | 38.10 | 40.64 |
2×2 | 2.54 | 5.08 |
2×3 | 5.08 | 7.62 |
2×4 | 7.62 | 10.16 |
2×5 | 10.16 | 12.70 |
2×6 | 12.70 | 15.24 |
2×7 | 15.24 | 17.78 |
2×8 | 17.78 | 20.32 |
2×10 | 22.86 | 25.40 |
2×16 | 38.10 | 40.64 |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 2x3-Pin 10-Pack |
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A module with a microphone for recognizing voice commands. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020312
No product available!
No product available!
PCB printed to the modular listening receiver for the 80m and 40m Dosia bands. Power supply + 9V / + 5V. AVT3193 A
No product available!
No product available!
No product available!
AHRS module (Attitude Heading Reference System) for Computers Odroid C1, C1 +, C0, C2, XU3, XU4
No product available!
No product available!
No product available!
No product available!
MYIR MYC-C7Z010 is a single board module based on the MYC-C7Z010 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
No product available!
No product available!
No product available!
A module that allows you to control RGBW LED strips and chains via WiFi using a smartphone application. It is powered with the voltage from 12 V to 24 V, has 4 channels with a total capacity of 12 A. BleBox wlightBox Pro
No product available!
Orange Pi Win 1GB DDR3 RAM A64 Quad-core 64-Bit WiFi Mini PC
No product available!
No product available!
Let\'s talk cars. Because cars are cool, and the coolest of the cool might be the sports coupe: a sleek and stylish two-door car designed for high performance and driving enjoyment. Often built with a low, wide profile, sports coupes typically feature a powerful engine, sport-tuned suspension, aerodynamic design, and other performance-enhancing features that prioritize speed, agility, and handling. You don\'t buy a coupe for its fuel economy or trunk space, you buy it because a) you love to drive, b) you want to make a statement, and c) the cool factor. And nothing is cooler on a car, or makes a bigger statement than gull-wing doors! UGears 70205
No product available!