- Out-of-Stock
This small digital distance sensor detects objects between 0.5 and 5 cm (0.2" and 2") away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is a good choice for non-contact object detection, and its short minimum detection distance lets it see objects very close to the face of the sensor.
![]() |
The GP2Y0D805 and GP2Y0D810 are Sharp’s smallest and fastest distance sensors. With a sample rate of almost 400 Hz and a sensing distance to 5 cm or 10 cm, respectively, these sensors provides attractive alternatives to shorter-range LED-phototransistor reflectance pairs and longer-range but slower sensors such as the Sharp GP2Y0A21YK0F analog distance sensor. The output, Vo, is driven low when the sensor detects an object; otherwise, the output is high.
The GP2Y0D805Z0F detects objects between 0.5 cm and 5 cm away from the sensor face, and the GP2Y0D810Z0F detects objects between 2 cm and 10.25 cm away. There are a few millimeters of hysteresis around the maximum range threshold and no hysteresis at the minimum range threshold. Note that these sensors will only tell you if there is an object within the detection range along their lines of sight; they will not tell you how far away the object is.
Please note that this sensor requires external components and has a non-standard 1.5 mm pitch, which can make it difficult to integrate into projects based on a 0.1" pitch. We offer a carrier board for this sensor that includes these required components and provides a 0.1"-pitch, three-pin interface: ground, power, and digital output. The carrier board can be purchased with the GP2Y0D805Z0F sensor soldered in, with the GP2Y0D810Z0F sensor soldered in, or without any sensor.
![]() |
| Sharp GP2Y0D805Z0F digital distance sensor 5 cm measuring characteristics. |
|---|
![]() |
| Sharp GP2Y0D810Z0F digital distance sensor 10 cm measuring characteristics. |
|---|
Some example applications include:
We carry three analog sharp distance sensors as well: the Sharp GP2D120XJ00F 4-30 cm, the Sharp GP2Y0A21YK0F 10-80 cm, and the Sharp GP2Y0A02YK0F 20-150 cm. These analog distance sensors have longer minimum detection distances and much lower response times than the GP2Y0D805 and GP2Y0D810, but they can see farther and report the distance to the detected object rather than simply if an object is detected.
![]() |
| A variety of Sharp distance sensors. |
|---|
Note: This sensor requires external components, which are not included. Please see the datasheet or our GP2Y0D810Z0F carrier board or for details.
![]() |
Sharp GP2Y0D810Z0F Digital Distance Sensor 10cm |
![]() |
Pololu Carrier for Sharp GP2Y0D810Z0F and GP2Y0D805Z0F Sensors |
![]() |
Sharp GP2D120XJ00F Analog Distance Sensor 4-30cm |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Kit with Raspberry Pi Zero 2 W, official accessories, Waveshare USB hub and a dedicated case
No product available!
Kit with Raspberry Pi Zero 2 WH, official accessories, Waveshare USB hub and a dedicated case
No product available!
Development kit with a processor equipped with 8 ARM Cortex-A78AE v8.2 cores and the NVIDIA Ampere graphics system consisting of 1792 cores supporting CUDA technology. NVIDIA 945-13730-0005-000.
No product available!
Decoder dedicated to receive digital terrestrial TV programs in the DVB-T2 H.265 standard. Equipped with HDMI, SCART, RF, USB and WiFi communication. BLOW 4815FHD
No product available!
Digital tuner for terrestrial TV reception in DVB-T, DVB-T2 HEVC and DVB-C standards on notebooks and computers. Rebel KOM1060
No product available!
Brushless motor driver dedicated to Arduino. It can handle drives with a control voltage from 9 V to 24 V DC and provide currents up to 20 mA. Seeed Studio 105030027
No product available!
A bionic robot dog that is an ideal tool for learning programming and studying the movement of four-legged robots. Thanks to a dedicated Arduino board that coordinates movements, you can connect various sensors to get additional interaction with the environment. Seeed Studio 114992499
No product available!
The LoRa omnidirectional antenna is made of fiberglass. It has an average gain of 5 dBi and works in the frequency range from 860 to 930 MHz. Seeed Studio 318020612
No product available!
Heat sink dedicated to the NanoPi NEO minicomputers. Comes with thermopad. FriendlyELEC NanoPi NEO Heat Sink
No product available!
USB adapter for a computer working as a 2-channel oscilloscope, 34-channel logic analyzer and a programmable signal generator. Digilent 411-001
No product available!
USB adapter for a computer working as a 2-channel oscilloscope, 34-channel logic analyzer and a programmable signal generator. BNC probes included. Digilent 471-058
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Violet
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Bronze
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Graphite
No product available!
A set for building a mobile robot with Mecanum chassis based on Raspberry Pi. Equipped with the Raspberry Pi Build HAT expansion module. Waveshare BuildMecar-Kit-A
No product available!
A set for building a mobile robot with Mecanum chassis based on Raspberry Pi. Equipped with Raspberry Pi Build HAT expansion module and 5 MP camera. Waveshare BuildMecar-Kit-B
No product available!