- Out-of-Stock
Pololu RP5 Expansion Plate RRC07B (Wide) Solid Black
This expansion plate is designed for mounting on the RP5 tracked chassis and made of 1/8" (3mm) acrylic. The multiple 3 mm slots give you the flexibility to mount components in a variety of positions anywhere on the plate.
![]() |
| Two RP5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
![]() |
| Pololu RP5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
![]() |
| A narrow RP5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your RP5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the RP5 tracked chassis.
The plate is also compatible with the Dagu Rover 5 tracked chassis, although we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners.
The Pololu RP5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the RP5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm) and covers both the main plastic housing and the tracks.
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5 Expansion Plate RRC07A (Narrow) Solid Black |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack |
Manufacturer
Responsible person
A universal set of structural elements (plastic beams, plates, metal brackets and fasteners, and a set of screws and nuts). It also includes the necessary tools. Totem TKM-MK2
No product available!
A universal set of structural elements (plastic beams, plates, metal brackets and fasteners, and a set of screws and nuts). It also includes the necessary tools. Totem TKM-MK3
No product available!
A set for building an electronic laboratory based on a TotemDuino board. It is a great platform for experimenting, learning electronics and programming Arduino. Totem TKM-MCL1
No product available!
Side panel with I/O elements for Totem Mini Lab and Totem Micro Lab sets. There are buttons, potentiometers, LED diodes and a relay on the board. Totem TE-SP01-B
No product available!
Side panel with sensors for Totem Mini Lab and Totem Micro Lab sets. The board has a microphone, OLED display, DH11 humidity sensor, NTC thermistor, buzzer and a DC motor control module. Totem TE-SP02-B
No product available!
Side panel with audio elements for Totem Mini Lab and Totem Micro Lab sets. The board has an audio amplifier with a loudspeaker, a VU indicator, a function generator and a pi filter circuit. Totem TE-SP03-B
No product available!
A stand for mounting the side panel for the Totem Mini Lab set. Increases the stability of the structure. Totem M-MLE1
No product available!
A set for building a fighting robot controlled by a mobile application for a smartphone or tablet. Totem TRK-MT1G
No product available!
A set for the construction of two fighting robots (green and yellow) controlled by a mobile application for a smartphone or tablet. Totem TRK-MT2
No product available!
A kit for building a four-wheeled platform controlled by a mobile application. TMK-4WDU totem
No product available!
A set for building a mobile robot with a gripper controlled by a mobile application. TMK-DMNNG totem
No product available!
Kit for building a dog robot controlled by a wire with a switch. Totem TKR-DG
No product available!
Kit for building a giraffe robot controlled by a wire with a switch. Totem TKR-GRF
No product available!
Kit for building a dinosaur robot controlled by a wire with a switch. Totem TKR-TRX
No product available!
A set for building a walking robot controlled by a mobile application. Totem TKR-LSP
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
No product available!
Pololu RP5 Expansion Plate RRC07B (Wide) Solid Black