- Out-of-Stock
USB Type C PD Trigger 9/12V 5A (no connector)
ID: 584726
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Description
A trigger module designed for chargers PD 2.0 and PD 3.0 (Power Delivery). It is equipped with a USB type C input and output on pads. It allows you to power devices using PD USB-C chargers with the selected voltage: 9 V or 12 V, as well as test chargers (works with all USB PD2.0 PD3.0 Fast devices) Charging and QC4.0). The selection of the output voltage is made by a switch, and the voltage status is indicated by colored LEDs.
Features
- Output voltage: 9 or 12 V
- Output current: up to 5 A
- Power: 60 W
- Input connector: USB Type-C
- Output connector: pads (no connector)
- Output voltage range LED indicator
- Control button
- Over-voltage and reverse connection protection
584726
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The cable is terminated with USB type C plugs, compliant with Quick Charge 4.0 and Power Delivery standards. LANBERG
zł9.14
24h
Available quantity: 6
Available
The cable is terminated with USB type C plugs, compliant with Quick Charge 4.0 and Power Delivery standards. LANBERG
zł9.45
24h
Available quantity: 8
Available
The cable is terminated with USB type C plugs, compliant with Quick Charge 4.0 and Power Delivery standards. LANBERG
zł9.29
24h
Available quantity: 3
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output on a 5.08 mm ARK screw connector. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł25.90
Delivery date unknown
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and USB typ A output. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł35.49
24h
Available quantity: 4
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł49.90
24h
Available quantity: 1
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and a USB type A output. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
zł24.80
Delivery date unknown
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and a USB type A output. It enables powering devices with 15 V or 20 V and testing chargers. PDC005
zł25.95
24h
Available quantity: 15
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 15 V or 20 V and testing chargers. PDC005
zł20.90
24h
Available quantity: 2
Available
Other products in the same category (16)
Dispensing needle for precise application of glue, flux with an internal diameter of 0.2mm and an external diameter of 0.4mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.
Retired
No product available!
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
Retired
No product available!
A network card that supports two WiFi frequency bands (2.4GHz and 5GHz) with a USB connector. It allows you to connect devices without an internal network adapter to the WiFi network. TP-LINK AC600
Retired
No product available!
Integrated capacitive fingerprint sensor communicating with the external system via the UART interface. The module has a rectangular sensor field and downloads a fingerprint image with a resolution of 508dpi. Waveshare UART Fingerprint Sensor (R)
Retired
No product available!
Sipeed MAIX Bit is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110991190
Retired
No product available!
Based on MAIX Module, the Maixduino is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110110044
Retired
No product available!
Module with 12.48" e-Paper display and 1304x984 px resolution. Communicates with external systems via the SPI interface. It has low power consumption and a wide viewing angle. Waveshare 12.48inch e-paper Module
Retired
No product available!
RoboClaw 2x60AHV Motor Controller (V7C) is a two-channel DC motor driver, operating voltage: 10,5 to 60V, maximum continuous current: 60A, the ability to easily implement feedback loops with PID controller, security systems. Pololu 3583
Retired
No product available!
Gate driver in uWiFi technology with extended range, with application for Android/iOS. BleBox GateBoxPro
Retired
No product available!
Camera module with MT9J003 sensor cooperating with ArduCam USB Shield. The maximum video resolution is 3856x2764 pixels. LS-18023 lens mount possible. ArduCam A0096
Retired
No product available!
A 150mm 2-wire cable terminated terminated with a plug and socket JST XH2.54.. 22AWG cable diameter.
Retired
No product available!
Digital microscope with 3" LCD display and HDMI output. The microscope is equipped with a 3MPx image sensor with a magnification factor up to 300 times. Andonstar ADSM201
Retired
No product available!
120W power supply, 24VDC output voltage and 5A output current. Mounting on a DIN rail. Built-in overload and short circuit protection. MEAN WELL DR-120-24
Retired
No product available!
A hand-held thermal imaging camera with a 2.4" LCD screen. It measures the temperature in the range from -20 to 300°C. HTI HT-02D
Retired
No product available!
LCD display with LED backlight (white), negative blue, 2x20, with extended temperature range, meeting the requirements of RoHS
Retired
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005