- Out-of-Stock
Power HD Micro Servo HD-1900A - 180° analog servo
ID: 195805
Micro analog servo with plastic gear. It has a range of motion of 180°. Pololu 1050
Description
Micro analog servo with plastic gear. A standard PWM modeling signal is used for control. The servo has a range of motion of approximately 180°. The recommended operating voltage is 6 V and at this voltage the servo has a speed of 0.08 s/60° and a torque of 1.5 kg*cm. The cable is terminated with a standard JR/Futaba 3-pin connector. Perfect for small flying models.
Features
- Supply voltage 4.8 to 6 V
- Speed (no load)
- 4.8V - 0.11s/60°
- 6V - 0.08s/60°
- Torque:
- 4.8 V - 1.2 kg*cm
- 6 V - 1.5 kg*cm
- Plastic gear
- PWM control range: 800 to 2200 us
- Dimensions: 22.9 x 12 x 27.3 mm
- Weight: 9 g
Kit contains
- Power HD Micro Servo HD-1900A
- A set of draglines and mounting elements
195805
Data sheet
- Gear material
- Plastic
- Torque
- 1,5 kg-cm
- Rozmiar serwa (seria)
- Micro
- Prędkość kątowa
- 0,8 s/60°
- Sprzężenie zwrotne
- Nie
- Praca ciągła 360°
- Nie
- Power supply voltage
- 4,8 - 6 V
- Weight
- 9g
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Pololu 779 15 cm servo extension with two female JR connectors enables easy and flexible connection of devices with 3-pin male connectors. It is used in robotics, automation, and RC systems to integrate servos, sensors, and controllers while maintaining the appropriate pitch and line designation.
zł21.16
Delivery date unknown
No product available!
The Pololu 780 30 cm servo extension with two female JR connectors enables flexible connection of devices with 3-pin 2.54 mm pitch connectors. The twisted-wire construction reduces EMI interference, and compatibility with RC standards makes it suitable for modeling, robotics, and control systems.
zł23.68
Delivery date unknown
No product available!
16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685, RoHS
zł77.64
24h
Available quantity: 4
Available
The servo driver module is an extension intended for minicomputers Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +. Allows you to control 16 PWM channels. Waveshare 15275
zł57.23
Delivery date unknown
No product available!
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł32.66
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
Assembly grease is a preparation that works well even in the most demanding conditions. AG Termopasty ART.AGT-214
Retired
No product available!
No product available!
No product available!
No product available!
collective work, J. Szabatin (ed.), K. Radecki (ed.)
Delivery date unknown
No product available!
No product available!
No product available!
A set of spacers and connectors together with a PCB to expand the Pololu 3pi robot. Red PCB in a version without cutouts for the display and connectors. Pololu 976
Retired
No product available!
No product available!
No product available!
No product available!
HDMI to CSI-2 bridge module based on TC358840 chip. It has a 22-pin FPC connector with a pitch of 0.5 mm and an audio connector. The input signal is supplied through the HDMI connector. Auvidea 70511
Retired
No product available!
No product available!
Module with e-Paper display, diagonal 7.5" and resolution 640x384 px. Communication via SPI interface. Waveshare 7.5inch e-Paper HAT (C)
Retired
No product available!
The ST25TA02KB-P is a dynamic NFC/RFID tag IC with a digital General Purpose Output (GPO), embedding a 2 Kbit EEPROM that supports NDEF tag applications for NFC Forum Type 4
Retired
No product available!
Micro analog servo with plastic gear. It has a range of motion of 180°. Pololu 1050