- Out-of-Stock
Single-channel Schmitt trigger inverter from the AHC logic family, designed for operation in a wide supply voltage range of 2.0–5.5 V. The SOT-23 package enables compact SMD mounting in digital designs.
The 74AHC1G14GV is a single NOT gate with a Schmitt trigger input, providing improved signal integrity through voltage hysteresis. The device is intended for applications requiring noise suppression, signal shaping of slow-rising edges, and conversion of analog or noisy signals into stable digital logic levels.The AHC (Advanced High-Speed CMOS) family supports a supply voltage range from 2.0 V to 5.5 V, enabling integration with both 3.3 V and 5 V systems. Low input capacitance and fast propagation delay allow the device to be used in higher-frequency signal paths.The Schmitt trigger input increases noise immunity and prevents multiple switching events when processing slow or noisy input signals.
Dispensing needle for precise application of glue, flux with an internal diameter of 0.84mm and an external diameter of 1.25mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.6mm and an external diameter of 0.89mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.51mm and an external diameter of 0.8mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.41mm and an external diameter of 0.69mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.3mm and an external diameter of 0.55mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.25mm and an external diameter of 0.5mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.24mm and an external diameter of 0.45mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.2mm and an external diameter of 0.4mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.
No product available!
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
No product available!
Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
No product available!
A two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302
No product available!
Single-channel Schmitt trigger inverter from the AHC logic family, designed for operation in a wide supply voltage range of 2.0–5.5 V. The SOT-23 package enables compact SMD mounting in digital designs.