- Out-of-Stock
 
        
          This is a rechargeable 7.2 V NiMH battery pack with a capacity of 200 mAh. The pack consists of six 1/3-size AAA cells in two rows and a 4" lead terminated by a “JR”-style connector.
|  | 
This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connector is the same as what is found on the most servos and has a 0.1" spacing, so it fits nicely with 0.1" male headers and can plug directly into most RC receivers, servo extension cables, and servo switch harnesses, and custom cables made with JR male connectors or Futaba J male connectors. Note, however, that this style of connector is often referred to as “male” in the RC hobby industry, so please use the picture on the right to clear up any potential confusion.
Our rechargeable NiMH battery packs give you variety of options for powering your robot or electronics project. The battery packs use 1.2 V cells and are available in several capacities:
|  | 
| Cell Type | Capacity (mAh) | 
|---|---|
| AA | 2200 | 
| AAA | 900 | 
| 2/3 AAA | 350 | 
| 1/3 AAA | 200 | 
The picture to the right shows the relative sizes of our NiMH battery packs. These packs are well-suited for powering small robots, and the smaller (1/3- or 2/3-AAA) battery packs make great power sources for miniature robots, such as those that might be based on our Baby Orangutan robot controller.
| 
 | 
 | 
Battery pack color may differ from what is shown in the main product picture.
Note: The battery voltages listed in the product descriptions are based on the 1.2 V nominal voltage of the NiMH cells from which the packs are made. The actual voltage will depend on how charged the batteries are. A fully charged NiMH cell will deliver almost 1.5 V, so, for example, a “6V”, 5-cell pack can measure over 7 volts after being charged, and it can fall well below 5 volts when the pack is drained. You will need to charge these battery packs before you first use them. The iMAX-B6AC battery charger works well with these battery packs.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
SD and microSD card reader with USB 3.0 interface. It supports most SD cards and is compatible with popular operating systems. Gembird UHB-CR3-01
 No product available!
 No product available!
 No product available!
Starter kit with PLC S7-1200 controller with CPU 1212C, AC/DC, with integrated 8DI/6DO/2AI module, software and necessary accessories. Siemens 6ES7212-1BE34-4YB0
 No product available!
Module with a CCS811 air quality sensor for measuring the concentration of carbon dioxide (CO2) and volatile organic compounds (VOC) in the air. It communicates via the I2C interface. DFRobot SEN0339
 No product available!
The kit consists of 4 stackable units, each with a specially designed Single Board Computer (SBC) based on the Samsung Exynos 5422 octa-core processor. The OS is compatible with the ODROID-XU4, and is mounted on an aluminum case
 No product available!
 No product available!
V4 features the same sensors as v3 (L3GD20H, LSM303D) and adds an LPS25H digital barometer. An I²C interface accesses 10 independent measurements that can be used to calculate the sensor’s altitude and absolute orientation.
 No product available!
 No product available!
BleBox BleBoxProbe is a precise, waterproof digital probe, ideal for temperature control in various conditions, compatible with BleBox devices
 No product available!
Cable with USB type A and lightning connectors, cable length 1m. LANBERG
 No product available!
 No product available!
Hardware extension adds 863 to 870 MHz radio communication capability to Open4, EvoPrimer and STM32 Primer2 platforms
 No product available!
Case dedicated to minicomputers Cubieboard and Cubieboard 2. Cubieboard Deluxe Case
 No product available!
 No product available!
A set of spacers and connectors together with a PCB to expand the Pololu 3pi robot. Red PCB with cutouts for the display and connectors. Pololu 977
 No product available!
