Raspberry RPI-ENCPP01-CLR

Module with a digital gas sensor MiCS-4514. It allows you to measure the concentration of CO, C2H5OH, H2, NO2, NH3 and communicates via the I2C interface. DFRobot SEN0377

Universal power supply module working on the basis of four 18650 batteries. It offers DC outputs with voltages of 9 V, 12 V, 24 V and adjustable in the range from 1 to 20 V, as well as two USB 5 V outputs. DFRobot FIT0674

Flexible adapter for microSD to SD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC

Black and white e-Paper display with a diagonal of 7.5" and a resolution of 800x480 px. SPI interface. Without PCB. Waveshare 7.5inch e-Paper (G)

A mini welding machine designed to connect 18650 type battery cells

Brushless motor driver module with current efficiency up to 20 A. It can work with LiPo 3S and 4S packages. BLHeli XSD20A

The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499

The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505

1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277

A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812

Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22663

Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE

A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a D24 tip

A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a B2 tip

Module with 4 LED displays (three LEDs in red, yellow and green) dedicated to the Raspberry Pi. Perfect for use as a traffic light. SB Components 06977

6-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21802