AVT3129 C - electronic lock / immobilizer. Assembled set

Starter kit containing Raspberry Pi 4B 2 GB and all necessary accessories: 32 GB microSD memory card with Rasberry Pi OS system, Ethernet cable and official accessories: housing, cooling kit, power supply, HDMI cable and camera

The surface-mount ARM R7FA4M1AB3CFMAA0 microcontroller from Renesas Electronics RA4M1 family uses the ARM Cortex M4 core and offers 256 kB of Flash memory and rich communication interfaces. It operates in the voltage range of 1.6-5.5 V and temperatures from -40°C to 105°C, having 18 ADC channels and 10 counters.

Kit for repairing paths on printed circuit boards. Includes FBX08S dispenser for precise dispensing of copper wires and two spools of 0.01mm FXS-9 wire. Mechanic FBX08s

The two-channel signal generator offers a frequency range of up to 15MHz for square and triangle waves and up to 6MHz for pulses and arbitrary waves. The device provides high precision with a frequency accuracy of 20ppm and stability of 1ppm/3h, as well as pulse width adjustment functions and an amplitude resolution of 1mV. JDS2900-15

The two-channel signal generator supports a frequency range of up to 30MHz for a sine wave and allows for precise adjustment of signal parameters. The device is characterized by high accuracy, resolution of 14 bits per wave and output impedance of 50Ω. JDS2900-30

The two-channel DDS signal generator supports a frequency range of up to 15MHz with a precision of up to 0.01uHz and DDS technology ensures signal stability. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance. Junctek JDS6600-15

A two-channel DDS signal generator with a range of up to 40MHz ensures precise signal generation thanks to DDS technology with an accuracy of 0.01uHz. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance, making it irreplaceable in electronics laboratories. Junctek JDS6600-40

The two-channel DDS signal generator with a frequency of 60MHz enables the generation of various waveforms, from a sine wave with a range of up to 60MHz to a pulse wave with a range of up to 6MHz. The device is distinguished by a precise frequency resolution of 0.01uHz, stability of 1ppm/3h and 12-bit waveform resolution. Junctek JDS6600-60

Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"

Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. NanoV2 3.2"

SDR (Software Defined Radio) receiver that allows you to receive signals in the frequency range from 10 kHz to 1 GHz. It is ideal for both monitoring low frequencies and receiving signals on higher bands

Thermal imaging camera module with an MLX90640 infrared sensor and a 2.8" TFT LCD display. It offers an accuracy of 2°C and a viewing angle of 55°x35°.

Antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an RP-SMA connector. SparkFun WRL-18083

Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316

WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21250

MP3 player module controlled by I2C interface or switching inputs. It is based on a 1.4 W audio amplifier. The board has a 3.5 mm audio output and a connector for connecting a loudspeaker. Files are played from a microSD card. SparkFun DEV-19030