- Out-of-Stock
XBee-Pro 900 XSC S3B Wire
ID: 201564
WRL-11634
WRL-11634 XBee-Pro 900 XSC S3B Wire
Description:
Do you need moar power for your wireless widget? The XBee-PRO XSC 900 MHz RF module features two times the throughput and 20 times less current draw than the previous XSC module. This version (S3B) features an ADF7023 transceiver from Analog Devices, which can toss your data up to 28 miles Line-of-Sight (LOS), along with low power consumption, drawing less than 2.5 uA in power down.
Also, the latest XBee-PRO XSC is firmware compatible with the legacy 9XStream® and the legacy XBee-PRO XSC modules. And because its an XBee RF device it is, of course, pin compatible with existing through-hole XBee modules.
Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!
Features:
- Analog Devices ADF7023 Transceiver, Cortex-M3 EFM32G230 @ 28 MHz
- 902 MHz to 928 MHz Frequency Band
- 10 Kbps or 20 Kbps Data Rate
- Up to 2000 ft (610 m) Indoor/Urban Range
- Up to 9 mi (14 km) LOS w/ Dipole Antenna
- Up to 28 mi (45 km) LOS w/ High-Gain Antenna
- Up to 24 dBm (250 mW) Tx Power (Software Selectable)
- Voltage Requirement: 2.4 to 3.6 VDC
- Tx Current: 215 mA
- Rx Current: 26 mA
- Sleep Current: 2.5 uA
- Wire Antenna
Documents:
Replaces: WRL-09085
201564
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
eMMC Flash memory module for Hardkernel Odroid N2L computers. 128GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 128GB eMMC Module N2L Linux
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 8GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2L Android
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 16GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 16GB eMMC Module N2L Android
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 64GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 64GB eMMC Module N2L Android
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 128GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 128GB eMMC Module N2L Android
Retired
No product available!
Two-way loudspeaker crossover with a crossover frequency of 3000 Hz. It works with speakers with an impedance of 4 to 8 Ω and offers power up to 50 W
Retired
No product available!
SpaceSOM series module with NXP i.MX8M plus 1.8 GHz processor (4 Cortex-A53 + Cortex-M7 cores), 2 GB RAM and 8 GB eMMC memory. SomLabs SLS35X8MPQC_1800C_02GR_08GE_0SF_C
Retired
No product available!
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985
Retired
No product available!
USB-TTL converter with USB type A, micro USB and USB type C connectors. Enables communication between the UART serial interface and the USB interface. SB Components 24780
Retired
No product available!
ACeP e-Paper 7-color display module with 7.3" diagonal and 800x480 px resolution. It communicates via SPI interface. Waveshare 7.3inch e-Paper HAT (F)
Retired
No product available!
LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653
Retired
No product available!
Matrix display module with Raspberry Pi Pico W control board. It has built-in 583 RGB LEDs in a 53 x 11 layout, an amplifier with speaker and buttons. Ideal for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM631
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Candy
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Flower
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Frozen
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Jungle
Retired
No product available!
WRL-11634