Odroid WiFi Module 3 - RTL8188CUS WiFi card

Mains power supply 5V, 1A, cable terminated with a mini-USB plug. DC / 230V AC

Integrated capacitive fingerprint sensor communicating with the external system via the UART interface. The module has a rectangular sensor field and downloads a fingerprint image with a resolution of 508dpi. Waveshare UART Fingerprint Sensor (R)

The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z

LCD 2x8, 58x30mm, LED backlight (white), NEGATIVE BLUE, enhanced temperature range, RoHS

Soldering station 5in1: hotair 100..480 degrees C, soldering tip 75W, power supply 0..15V / 1A, RF signal tester, voltage meter. Included, among others set of nozzles and wires for the power supply

Male terminal block, angled, 10-pin. Pitch 3.5mm. Height 9.2mm. KF2EDGR

A network card that supports two WiFi frequency bands (2.4GHz and 5GHz) with a USB connector. It allows you to connect devices without an internal network adapter to the WiFi network. TP-LINK AC600

SanDisk Ultra memory card is a micro SDHC card, with a capacity of 32GB and a reading speed of 80 MB/s with an adapter. SanDisc SDSQUAR-032G-GN6MA

Dagu Wild Thumper Wheel 120x60mm Pair with 4mm Shaft Adapters - Chrome

RADIO REMOTE CONTROL - SET ASSEMBLED AND STARTED

REMOTE CONTROLLING BY PHONE - PRINTED PLATE

Bartosz Jabłoński

Needle bending needle, for precise glue application, Flux 0.514mm internal diameter and 0,8192mm outside diameter