.png)
- Out-of-Stock
ZL1USB_B
ID: 20520
UART (RS232)<->USB converter
ZL1USB is module for data transmission via USB interface. It is based on FTDI’s FT232BM device. It is prepared
to use for communication between PC and any digital circuit equipped with UART. Windows drivers emulate serial
port on PC, that's why developing computer applications is simple.
Features
- TTL interface (UART TTL levels compatible)
- I/O lines ready to cooperate with 5V circuits
- Data transmission speed: 300bd...3Mbd
- 384B of Rx buffer/128B of Tx buffer
- 7/8 data bits, 1 or 2 stop bits, znacznik parzystości lub jego brak
- Bidirectional, asynchronous data transmission
- UHCI/OHCI/EHCI compatible
- USB 1.1 i USB 2.0 (up to 12 Mbd in Full Speed mode) compatibility
- EEPROM memory for USB VID, PID and serial number
- Royalty free drivers for Windows 98/98SE/Me/2000/XP/CE, MAC-OS and Linux
- External power supply 5V/30mA (max.)
- Built-in 3.3V/5mA voltage regulator
Standard equipment
- Assembled module
| Notice!ZL1USB_B modules have CON2 connector on the top side of board (the same as USB connector). |
Download:
20520
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 279
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.90
24h
Available quantity: 284
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 71
Available
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.90
24h
Available quantity: 57
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 24
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł6.20
24h
Available quantity: 412
Available
Other products in the same category (16)
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-100-2C3
Retired
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C
Retired
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C3
Retired
No product available!
Module with Xilinx Artix-7 15T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-15-1C
Retired
No product available!
Module with Xilinx Artix-7 35T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-35-2C
Retired
No product available!
Module with Xilinx Artix-7 100T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-100-2C
Retired
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2C
Retired
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2D
Retired
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2L
Retired
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-01
Retired
No product available!
Base plate designed to work with TE0745 modules. TEB0745-02
Retired
No product available!
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
Retired
No product available!
Base plate for Trenz Electronic 4 x 5 cm modules. It allows you to connect an FPGA system through board-to-board connections to external peripherals to test and develop software. TE0701-06
Retired
No product available!
UltraITX + base board designed to work with TE0808 UltraSOM + MPSoC modules. It allows you to connect the module to external connectors and interfaces. TEBF0808-04
Retired
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
Retired
No product available!
TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02
Retired
No product available!
UART (RS232)<->USB converter