- Out-of-Stock
BATTERY CHARGER Li-Ion and Li-Poly - PRINTED PLATE
Producer: AVT
For several years, lithium-ion and lithium-polymer batteries have been widely available on the market at a relatively reasonable price. The favorable weight-to-volume ratio, small dimensions, no memory effect and the ability to quickly load are just some of their advantages. But there is no rose without thorns. These batteries can not be charged as easily as acid ones, because they can be destroyed. The presented system solves this problem in an uncomplicated way, and also allows you to charge eg from the USB port.
The printed circuit board and documentation are included.
Manufacturer
Responsible person
Module with a digital barometer DPS310. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C or SPI. Adafruit 4494
No product available!
Module with a 6-axis IMU sensor (accelerometer and gyroscope) that allows you to measure acceleration and rotational speed in a wide range of ±30g and ±4000dps. Communicates via I2C. Adafruit 4464
No product available!
Module with WM8960 audio decoder that allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Adafruit 4757
No product available!
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
No product available!
Wireless temperature and humidity sensor. It allows you to track changes in temperature and humidity in your home. Shelly H&T BLACK
No product available!
HAT module with MCC 118 chip, designed for Raspberry Pi. Provides 8 analog inputs with a resolution of 12 bits, sampling rates up to 100 kS/s and range +/-10 V. Digilent 6069-410-000
No product available!
HAT MCC 128 module for Raspberry Pi. Provides 8 analog inputs with a resolution of 16 bits, sampling rates up to 100 kS/s and a range of +/-10 V, +/-5 V, +/-2 V, or +/-1 V. Digilent 6069-410-001
No product available!
HAT MCC 134 module for Raspberry Pi. Provides 4 inputs with a resolution of 24 bits dedicated to thermocouples type J, K, R, S, T, N, E or B. Digilent 6069-410-002
No product available!
HAT MCC 152 module for Raspberry Pi. It provides 2 analog outputs with a resolution of 12 bits and a range of 0-5 V and 8 digital inputs/outputs. Digilent 6069-410-003
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometers and microphones. Digilent 6069-410-004
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometer and microphone. Two coaxial cables are included. Measurement Computing MCC 172
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007
No product available!
The expansion board with the LoRaWAN SX1302 and GNSS L76B module is dedicated to Raspberry Pi minicomputers. The kit includes the 868M antenna, GPS and necessary cables. Waveshare SX1302 LoRaWAN Gateway HAT
No product available!
The module with the LoRaWAN ASR6501 system and an external antenna, designed for the M5Stack sets. M5Stack U117
No product available!
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway
No product available!
Alkaline battery A27 12V 7.6x27.3 mm with a capacity of 25 mAh
No product available!
BATTERY CHARGER Li-Ion and Li-Poly - PRINTED PLATE