- Out-of-Stock
FeatherS2 - WiFi module with ESP32-S2
ID: 587327
5906623430840
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
Description
Module with WiFi Espressif ESP32-S2. It has 16 MB Flash memory, 8 MB external PSRAM memory, integrated WiFi 802.11 b / g / n transceiver and a JST-PH 2.0 connector for connecting a LiPo battery. There is a light sensor and an RGB diode on the board. In addition, the user has at his disposal two 3.3 V LDO stabilizers - one is responsible for powering the ESP system, and the other can be used to power external modules. FeatherS2 is easy to integrate with sensors due to the available STEMMA QT connector (Qwiic compatible).
The module offers great possibilities in the field of IoT systems and can be used both to control LEDs and to transfer data to a specific platform. FeatherS2 can also be programmed using the Arduino IDE, ESP-IDF or CircuitPython. Full documentation is available on the product page.
Features
- 32-bit 240 MHz single-core processor
- 16 MB SPI Flash
- 8 MB extra PSRAM
- 2.4 GHz Wi-Fi - 802.11b/g/n
- 3D Antenna
- 2x 700 mA 3.3 V LDO regulator
- Optimised power path for low-power battery usage
- LiPo battery management
- Power (red), Charge (orange) & IO13 (blue) LEDs
- 21x GPIO
- USB-C
- USB backfeed protection
- APA102 RGB LED (CLK IO45, DATA IO40)
- ALS-PT19 Ambient Light Sensor (IO14)
- QWIIC/STEMMA connector
- Feather format
Kit contains
- FeatherS2 module
- 16-pin goldpin male connector
- 12-pin goldpin male connector
587327
Data sheet
- Microcontroller
- ESP32-S3
- Flash memory
- 16 MB
- Number of I/O
- 21
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 52,5 mm
- Width
- 22,8 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.08
24h
Available quantity: 16
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 20
Available
Cable with USB typ A and USB typ C connectors, compatible with Quick Charge 3.0, cable length 1,8m. LANBERG
zł11.06
24h
Available quantity: 4
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8m. LANBERG
zł10.17
24h
Available quantity: 10
Available
Other products in the same category (16)
FPF1048BUCX, Power Switch ICs - Power Distribution IntelliMAX Slew Rate Controlled Load Switch, WLCSP-6
Retired
No product available!
A mains charger with a USB socket and a built-in type-C USB cable. The maximum current generated by the charger is 2.4 A. eXtreme ATCCU24B
Retired
No product available!
A mains charger with a USB socket and a built-in type-C USB cable. The maximum current generated by the charger is 3.1 A. eXtreme NTC31CU
Retired
No product available!
WIFI-LPT100-B is a small module that enables communication using a wireless WiFi network. It has a UART interface, and is characterized by low energy consumption.
Retired
No product available!
5 megapixel camera module compatible with Coral Dev Board. Connects via the MIPI-CSI interface. Coral Camera
Retired
No product available!
Evaluation kit with i.MX 8M Mini Quad processor. It consists of a motherboard and a plate with an application processor plugged into the motherboard. The set has a WiFi module and Bluetooth 4.1 and a built-in chip antenna, connectors for display, audio and USB 3.0. NXP 8MMINILPD4-EVK
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Android
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8 GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Linux
Retired
No product available!
No product available!
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Retired
No product available!
BGA balls with a diameter of 0.35 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
BGA balls with a diameter of 0.3 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
Speaker cable, two-core with a cross section of 1 mm2, black and red, PVC insulation. Price per meter. TASKER TSK53
Retired
No product available!
Speaker cable, two-core, 0.75 mm2 cross section, black and red, PVC insulation. Price per meter. TASKER TSK52
Retired
No product available!
Tin Sn60Pb40 with flux (100 g spool), diameter 0.38 mm. Cynel LC60-0.38/100
Retired
No product available!
FPGA starter kit with Intel Stratix 10 GX. The module has integrated transceivers that transfer data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMM slots that support DDR4 SDRAM options. Terasic P0626
Retired
No product available!
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769