- Out-of-Stock
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometer and microphone. Two coaxial cables are included. Measurement Computing MCC 172
HAT module MCC 172 system designed for Raspberry Pi minicomputers. Provides two channels for taking sound and vibration measurements from IEPE sensors such as accelerometers and microphones. Two 24-bit differential analog input channels simultaneously acquire data at up to 51.2 kS / s. Users can turn the excitation current IEPE on and off. Each channel has a dedicated A/D converter, and both ADCs share the same clock and are synchronized to start conversions at the same time for synchronous data. Multiple MCC 172 HAT modules may be synchronized to one sampling clock. The clock is programmable for a sampling rate of 51.2 kS/s to 200 S/s and the trigger input (TRIG terminal) is used to delay the input scan until a certain condition is met on the trigger input. Up to eight modules can be placed on one Raspberry Pi.
The HAT configuration parameters are stored in the built-in EEPROM which allows the Raspberry Pi to automatically configure the GPIO pins when the HAT is connected. The open source MCC DAQ HAT library available in C/C++ and Python allows users to build Raspberry Pi applications using Linux.
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Minicomputer version 5 with 16GB RAM equipped with two microHDMI ports, 2 USB 3.0 ports and 2 USB 2.0 ports and a USB-C power connector. The processor is a 4-core Broadcom BCM2712 clocked at 2.4GHz. The board also has dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface and a real-time clock. This model offers exceptional performance thanks to 16GB RAM, which makes it perfect for advanced applications
No product available!
No product available!
TFT 2.8 "display module, touch panel, four buttons, dedicated to Raspberry Pi, RoHS
No product available!
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
No product available!
Single-channel Schmitt trigger inverter from the AHC logic family, designed for operation in a wide supply voltage range of 2.0–5.5 V. The SOT-23 package enables compact SMD mounting in digital designs.
No product available!
MYIR MYC-SAMA5D36 is a single board computer in the form of a card with SO-DIMM 200-pin connector. It has been equipped with the SAMA5D36 processor from Atmel, based on Cortex-A5 cores. It can work with a maximum frequency of 536 MHz. It has 512 MB DDR2 SDRAM, 256 MB NAND FLASH memory. GPIO ports, interfaces have been derived on the SO-DIMM 200-pin connector
No product available!
No product available!
No product available!
No product available!
3.2 "TFT display module with touchpanel, 320 x 240 pixel resolution, 34-pin, with icons on the display
No product available!
No product available!
Janusz Kwaśniewski
No product available!
No product available!
No product available!
No product available!
I/O Expansion board for Raspberry PI B+. PiFace Digital 2 add-on board for Raspberry Pi that allows for connecting things that will influence the world around it
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometer and microphone. Two coaxial cables are included. Measurement Computing MCC 172