- Out-of-Stock
Li-Po batteries are increasingly becoming the primary source of power replacing other chemical energy sources. The inverter can be used to use the LiPo cell to supply 5V systems.
The printed circuit board and documentation are included.
A detailed description in EP8 / 13 or
Attention: when using the cells, appropriate operating conditions should be maintained: protect the cell against mechanical damage, short-circuiting, overloading, overloading, overheating - in no case disassemble the built-in monitoring system of the cell. Failure to observe the conditions of safe operation may cause cell explosion and fire as well as health risks to the user.
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Neodymium rectangular magnet with dimensions of 10x4mm a and a height of 3 mm.
No product available!
No product available!
Evaluation kit with LittleBee GW1N-1 FPGA chip. Offers 1152 LUTs and 864 Flip-Flops (FF). The board has an FPC connector for the display and a USB type C. Sipeed Lichee Tang Nano
No product available!
HK ZIPPY Flightmax 5000mAh 2S1P 20C hardcase pack (14079)
No product available!
No product available!
7-segment LED display, 1 digit 13.20mm, green (575nm), 5mcd (10mA), common anode, red (630nm), 6mcd (10mA), common anode. Pb-free. LED1-AS-B-05211BMRMG
No product available!
RoboClaw 2x160A Motor Controller is a two-channel DC motor driver, operating voltage: 10.5..60V, maximum continuous current: 120A, easy implementation of feedback loops with PID controller, safety systems. Pololu 3582
No product available!
Cable with USB type A and lightning connectors, cable length 1.8m. Lanberg CA-USLM-
No product available!
1-meter cable with a USB C plug, enabling data transmission between USB C and USB A devices and used as a charger tip, compatible with USB 3.1. Akyga AK-USB-15
No product available!
This sensor shield utilizes the BME280 pressure/humidity/temperature sensor, the CCS811 air quality sensor and the APDS-9301 ambient light sensor - using each corresponding Arduino library. The shield has been equipped with two RJ11 connectors for wind and rain detection and measurement, as well as optional pins for external temperature readings and soil moisture sensor. DEV-14153
No product available!
No product available!
Akyga lithium-polymer battery with a rated voltage of 3.7 V and a capacity of 1500 mAh is equipped with PCM protection and a connector + 2.54 JST socket. The small size and large capacity allows it to be used to power all kinds of portable devices of various sizes and shapes
No product available!
No product available!
No product available!
No product available!
No product available!