- Out-of-Stock
TO1104 Plus - Portable Tablet Oscilloscope from Micsig
ID: 579645
Portable tBook mini oscilloscope with 8 "LCD display and touch screen. It has four measuring channels and is characterized by good measurement parameters: 100 MHz band, sampling rate of 1 GSa/s and 28 Mpts memory buffer. Micsig TO1104 Plus
Description
The Micsig tBook mini portable oscilloscope is a digital oscilloscope with an 8-inch LCD display and a touch screen. The device has four measuring channels and has good measurement parameters: 100 MHz band, sampling rate 1 GSa/s and 28 Mpts buffer. It has numerous outputs for connecting to another device via USB (Host and Device), HDMI, LAN and WiFi. In addition, the oscilloscope is equipped with a power connector and a battery with a capacity of 8000 mAh, which allows you to work up to 5 hours on one charge. The housing also has a stand enabling the oscilloscope to be positioned at an angle of 45 ° in a convenient way.
One of the most interesting features of the device is the built-in 31 types of automatic measurements. The user can choose one of 31 quantities measured automatically. The "Measure" tab displays all measurement options on one screen - just touch the desired measurement type to select it. In addition, the device supports 7 trigger modes, which allows you to customize the measurement method to suit your needs.
The oscilloscope has 8 GB of built-in memory, thanks to which the user can store screenshots directly on the device, and the built-in quick write function significantly simplifies and simplifies the process of data recording.
The oscilloscope also provides applications available for PCs and mobile devices with Android and iOS. This allows you to conveniently use the device remotely.
The set with the device comes with BNC probes, power supply and accessories to facilitate operation with the oscilloscope, among others decoder, CAN, LIN, SPI, I2C, UART.
Features
- Band: 100 MHz
- Channels: 4
- Sampling rate: 1 GSa/s
- Memory buffer: 28 Mpts
- Capture speed up to 80,000 wfm/s
- Bandwidth limitation: 20 MHz, high pass, low pass
- Outputs: Wi-Fi, LAN, HDMI, USB Host, USB Device, GND, DC power supply, trigger output
- Display:
- 8" TFT LCD
- Resolution 800x600 pixels
- Display range 14x10
- Capacitive touch screen
- Built-in 8 GB memory, waveforms and screenshots can be viewed and edited in the oscilloscope
- Android and iOS applications and PC for remote control
- Battery: 8000 mAh (working time up to 5 hours)
- Dimensions: 250 x 210 x 55 mm
Kit contains
- Micsig TO1104 Plus oscilloscope
- 4 x BNC probe
- Power Supply
- Power plug
- 5 x BNC colorful protective cap
- Battery
- Carrying strap
- Protective foil
- HDMI (free software)
- Bus decoder (CAN, LIN, SPI, I2C, UART)
579645
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Oscilloscope Probes (pair). 460-004
zł129.52
24h
Available quantity: 3
Available
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
Micsig differential probe from the DP series designed for high-voltage and differential signal measurements. Offers 100 MHz bandwidth and supports voltage measurements up to 700 V. Features a standard BNC connector and USB Type-C power supply. The current product revision includes a new enclosure with three function buttons. Micsig DP700
zł1,014.23
Delivery date unknown
No product available!
Other products in the same category (16)
Module designed for connecting more than one camera to a single CSI camera port on RPi board. One adapter board can connect 4 cameras and user can stack up max. 4 adapter boards that means up to 16 cameras on a single RPi board. ArduCAM B0069
Retired
No product available!
5mp 1080p OV5647 NoIR Camera Module with M12*0.5 Mount Lens for Raspberry Pi. ArduCam B0035
Retired
No product available!
OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi 3. ArduCam B0055
Retired
No product available!
Open source WIFI camera develop board based on Texas Instruments CC3200 SimpleLink WIFI IoT solution and Aptina MT9D111 camera module. ArduCAM B0073
Retired
No product available!
No product available!
Gravity: GPIO Shield for Arduino is an I / O port expander compatible with Arduino UNO. It allows to expand the capabilities of the base board by providing a total of 36 digital and analogue pins as well as UART and I2C interfaces. DFRobot DFR0334
Retired
No product available!
A highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi B+/2B/3B, uses i2S interface audio solution, supports 24-bit /192KHz high quality sound, compatible with other audio equipment via RCA lotus socket, includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly. DFR0449
Retired
No product available!
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
Retired
No product available!
No product available!
No product available!
No product available!
- The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan
Retired
No product available!
Pololu engine with 48 CPR encoder, with 4.4: 1 transmission, standard 12 V voltage and 2250 rpm. Pololu 3213
Retired
No product available!
This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 46.85:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2248.86 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor consists of a high-power, 12V brushed DC motor combined with a 74.83:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 3591.84 counts per revolution of the gearbox’s output shaft. Pololu 3218
Retired
No product available!
Portable tBook mini oscilloscope with 8 "LCD display and touch screen. It has four measuring channels and is characterized by good measurement parameters: 100 MHz band, sampling rate of 1 GSa/s and 28 Mpts memory buffer. Micsig TO1104 Plus