- Out-of-Stock
eMMC Module C2 Linux Black - 16GB
ID: 561308
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Description
Pre-installed Ubuntu 16.04 or latest version.
Ready to run out of the box
eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode.
The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
This eMMC chipset is not compatible with ODROID-XU4 / XU3 / U3 / U2 / X series
eMMC Module Reader is included
Adapter micro-SD for eMMC
Moduł eMMC attached to adapter
Storage I/O comparison
The C2 can boot from a MicroSD card or an eMMC module. The MicroSD interface supports the higher performance UHS-1 mode as well. File access of a 512MB file (read/write) on two different storage options shows distinct performance differences. The eMMC 5.0 storage is ~7x faster than the MicroSD Class-10 card in read tests. The MicroSD UHS-1 card is ~2x faster than the MicroSD Class-10 card in read tests. The MicroSD UHS-1 card provides a great low-cost option for many applications!
To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt.
Write speed command :
$ dd if=/dev/zero of=test.tmp oflag=direct bs=8M count=64
Read speed command :
$ dd if=test.tmp of=/dev/null iflag=direct bs=8M count=64
561308
Data sheet
- Compatible with
- Odroid C2
- Card capacity
- 16GB
- Operating system
- LINUX
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Camera with CMOS MT9M112 sensor with a resolution of 1280x1024 pixels. It communicates via the DVP parallel interface. ArduCAM U6080
Retired
No product available!
Adapter dedicated to Omnivision cameras. Allows you to connect an image sensor to the evaluation kit. ArduCAM B0012
Retired
No product available!
Camera module 18 Mpx with AR1820HS sensor working with Raspberry Pi. It offers a video resolution of up to 4912x3684 pixels at 15 fps. ArduCAM B0164
Retired
No product available!
Camera module based on the OV13850 CMOS matrix with a resolution of 4224x3136 px (13 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0129
Retired
No product available!
ArduCAM OV9281 1MP Global Shutter USB Camera Evaluation Kit - Evaluation Kit with 1MP OV9281 166°...
A set with a camera with a resolution of 1 MPx with an OV9281 sensor, a USB 3.0 adapter and a cable. ArduCAM EK024
Retired
No product available!
Module with USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. Has a built-in 16 MB hardware frame buffer. ArduCAM B0175
Retired
No product available!
Micro analog servo with plastic gear. It has a range of motion of 90°. GH-S37A
Retired
No product available!
GSM/GPRS + GPS module based on the RDA8955 chip. It integrates protocol stacks such as GSM/GPRS and supports the basic functions of voice calls, SMS and GPS data transmission. DFRobot TEL0134
Retired
No product available!
Aluminum case for minicomputer Raspberry Pi 4 model B, black color
Retired
No product available!
Module with 7-color ACeP e-Paper display, 5.65" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-5.65
Retired
No product available!
HAT module with RTC DS3231SN clock and MAX705 reset system designed for Raspberry Pi and Jetson Nano. The board has a CR1220 battery socket and a C-type USB connector. Waveshare RTC WatchDog HAT
Retired
No product available!
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connectors placed in a vertical position and a connector for RPI 400 at an angle of 45 °. Waveshare PI400-GPIO-ADAPTER-C
Retired
No product available!
The power supply module with the RTC DS3231SN clock is designed for the Raspberry Pi. It allows you to power minicomputer with voltage up to 28 V and create scripts for the power-on sequence. Pimoroni WITTY_PI_3_R2
Retired
No product available!
Module of the 8-channel I2C expander based on the TCA9548A system. It enables communication with many I2C devices that have the same address. Pimoroni 8086-006
Retired
No product available!
Mini board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. PIM577
Retired
No product available!
Module with a black and white e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM368
Retired
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)