.png)
- Out-of-Stock
UT109 - Universal multimeter by Uni-T
ID: 579620
Universal multimeter for automotive diagnostics. It allows you to measure direct and alternating voltage, direct and alternating current, resistance, temperature and capacity as well as frequency. It enables the measurement of parameters specific to the automotive industry, such as RPM or DWELL. Uni-T UT109
Description
| 1. LCD | 4. Power button |
| 2. Function buttons | 5. Rotary switch |
| 3. SELECT button | 6.Input terminals |
The series is useful for car maintenance personnel to diagnose traditional vehicles and hybrid electric vehicles. Its applications include working with a fuse, switch, solenoid valve, relay, charging system, fuel system, engine detection, etc.
Features
- Parameters
- DC voltage ( V) 4V/40V/400V/1000V ± (0,5% + 3)
- AC voltage (V) 4V/40V/400V/1000V ± (1% + 3)
- DC current (A) 400μA/4mA/40mA/400mA/4A/10A ± (1% + 2)
- AC current (A) 400μA/4mA/40mA/400mA/4A/10A ± (1,2% + 5)
- Resistance (Ω) 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ± (1% + 5)
- Capacitance (F) 10nF/100nF/1μF/10μF/100μF ± (3% + 5)
- Frequency (Hz) 10 Hz do 1 MHz ± (0,1% + 4)
- Temperature (° C) -40 ° C do 537 ° C ± (1% + 10)
- Functions
- Display with a maximum display of 4000
- Auto range
- Auto power off
- MAX / MIN / RS-232
- LCD backlight
- USB interface
- Input impedance for DCV about 10 MΩ
- Dwell / Tach 4CYL / 6CYL / 8CYL ± (3% + 5)
- General
- Power supply: 6F22 9 V battery
- Display dimensions: 65 × 43 mm
- Color: Red-gray
- Dimensions: 180 x 87 x 47 mm
- Weight 370 g
Kit contains
- Uni-T UT109 universal meter
- Test leads
- Point temperature probe
- Battery
- Alligator connectors
- RS-232 cable
- Multifunctional socket
- Software
- Instruction
579620
Data sheet
- Upper DC voltage range
- 200mV/2000mV/20V/200V/1000 V
- Upper AC voltage range
- 600mV/6V/60V/600V/1000V
- Upper DC current range
- 200μA/2mA/20mA/200mA/10A
- Upper AC current range
- 600μA/6000μA/60mA/600mA/10A
- Upper resistance range
- 400 Ω/4 kΩ/40 kΩ/400 kΩ/4 MΩ/40 MΩ
- Upper capacitance range
- 2nF/20nF/2μF/100μF
- Frequency range
- 10Hz - 1MHz
- Temperature measurement
- Yes
- Range adjustment
- Automatic
- True RMS
- No
- Hold function
- Yes
- Continuity tester
- Yes
- Diode tester
- Yes
- Transistor hFE measurement
- No
- Buzzer
- Yes
- Battery indicator
- Yes
- Automatic shut-off
- Yes
- Display backlight
- No
- Battery type
- 6F22
- Length
- 180 cm
- Width
- 87 mm
- Thickness
- 47 mm
- Weight
- 370 g
Manufacturer
- Lechpol Electronics Leszek Spółka komandytowa
- Garwolińska 1
- 08-400 Miętne
- Poland
- [email protected]
Responsible person
- Lechpol Electronics Leszek Spółka komandytowa
- Garwolińska 1
- 08-400 Miętne
- Poland
- [email protected]
You might also like
Kinetic 6F22 alkaline battery (9V voltage) 1 piece. Weight 47g
zł8.12
24h
Available quantity: 2
Available
Measuring probe for digital multimeter with clip with maximum opening of 10 mm. Ideal for measurements on SMD components.
zł10.74
24h
Available quantity: 32
Available
GP1604A/6LF22/6LR61/MN1604 alkaline battery with a voltage of 9V. GP 1604A
zł13.52
24h
Available quantity: 3
Available
6F22 alkaline battery with a voltage of 9V and a capacity of 550mAh. Maxell 6F22
zł8.71
24h
Available quantity: 16
Available
Other products in the same category (16)
100-pin connector (socket) for Raspberry Pi CM4 modules. 0.4 mm pitch, 1.45 mm height
Retired
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1
Retired
No product available!
50 W soldering iron for Bakon BK950D station. Works with soldering tips from the T13 series
Retired
No product available!
T13 soldering tip with a K-type cut tip designed for the Bakon BK950D station
Retired
No product available!
Black metal casing for Raspberry Pi 4 model B minicomputers. Equipped with active cooling ICE Tower Low Profile
Retired
No product available!
HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface
Retired
No product available!
HAT type power supply module with cooling fan designed for Raspberry Pi 4 model B. Provides flexible power supply to the minicomputer via DC 5.5x2.5 mm connector, XH2.54 mm connector, microUSB or USB type C connector
Retired
No product available!
Wall charger with USB and USB type C sockets. Supports QC3.0 + PD3.0 fast charging protocol with a maximum current of up to 3 A. USAMS US-CC085
Retired
No product available!
A spatula for removing prints from the 3D printer table. Made of stainless steel, it is durable and handy
Retired
No product available!
A needle with a diameter of 0.4 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
Retired
No product available!
Connector for connecting the 22-pin tape with 0.5 mm pitch to the printed circuit board. F0500WR-S-22PB
Retired
No product available!
Aluminum tensometer beam, allowing weight measurement up to 2 kilograms. It has four wires. It is used in kitchen scales and portable scales
Retired
No product available!
Educational set for building robots based on Totem construction elements. Designed for beginners, it allows you to create 7 robot structures based on the included assembly instructions. Totem TKR-RK1
Retired
No product available!
A computer adapter (USB, Ethernet, WiFi) that works as a 4-channel oscilloscope, a 16-channel logic analyzer and a programmable signal generator. Includes BNC probes. Digilent 471-040
Retired
No product available!
A computer adapter (USB, Ethernet, WiFi) that works as a 2-channel oscilloscope, a 16-channel logic analyzer and a programmable signal generator. Includes BNC oscilloscope probes. Digilent 471-041
Retired
No product available!
Transistor tester dedicated to work with Analog Discovery 2 and Analog Discovery (Legacy) devices. It allows you to draw the characteristics of such elements as diodes, NPN and PNP transistors as well as P and N FET transistors. Digilent 410-413
Retired
No product available!
Universal multimeter for automotive diagnostics. It allows you to measure direct and alternating voltage, direct and alternating current, resistance, temperature and capacity as well as frequency. It enables the measurement of parameters specific to the automotive industry, such as RPM or DWELL. Uni-T UT109