- Out-of-Stock
SWITCH FOR CHANDELIER v2 - PLATEBOARD AND CONTROLLED LAYOUT
Producer: AVT
It is a device that can be useful to anyone who wants to comfortably operate a two-section chandelier using a single-circuit switch. An example of application can be a real-life situation, when we buy a new chandelier with two sections, but the electrical installation allows to handle only one section, because there is a two-core cable under the plaster.
The previous version ( AVT2948 ) enabled working only with bulbs, whereas the version described here enables work not only with classic bulbs, but also with energy-saving fluorescent lamps and "LED bulbs" as sources of light. The main difference between this and the previous version is the change in the power supply method. In the previous version, the system "steals" energy intended for the bulb, changing the shape of the voltage supply for it to a small extent. Energy saving lamps with integrated electronic circuits inside are very sensitive to changes in the shape of the supply voltage, making their proper functioning difficult or even impossible. In the current form of the regulator, the power supply is supplied to the receiver constituting the light source without any "losses", which makes it possible to work with the majority of available light sources on the market.
The most important features of the device:
The set includes a printed circuit board, programmed layout and documentation.
Detailed description in EdW1 / 13 or ![]()
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
USB camera module with 8 MP resolution based on Sony IMX179 1/3.2" matrix compatible with UVC. It has variable focal length adjustable from 5 to 50 mm. Equipped with a lens with CS mount with integrated UV filter. ArduCAM UB0213
No product available!
A small tripod with 1/4" mounting screw for the Raspberry Pi HQ Camera. It has the ability to adjust the height with a rotary head. ArduCAM UB0217
No product available!
Nikon F-Mount lens mount adapter for C-Mount Raspberry Pi HQ. ArduCAM UB0218
No product available!
Multifunctional lens calibration kit for M12, CS-Mount, C-Mount and DSLR lenses. It allows focus calibration, FoV measurement without the need for additional calculations and focusing. ArduCAM B0226
No product available!
Set with 2 DOF control platform for cameras designed for Raspberry Pi minicomputers. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0227
No product available!
M12 mount lens included with adapter. Focal length 6 mm and FoV 70°. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN023
No product available!
Ultra wide angle lens with M12 mount included with the adapter. 2.8 mm focal length and 130° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN032
No product available!
C-Mount lens. Focal length 5 mm, FoV 60.3° (H), 47.1° (V) manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN042
No product available!
Quad-band GSM/GPRS module operating at 850/900/1800/1900MHz frequencies. It has integrated TCP/IP, UDP, FTP, PPP network protocols. Quectel M95FA
No product available!
Module with 9-axis IMU BMX160 sensor (accelerometer, gyroscope and magnetomet) and BMP388 pressure/temperature sensor. Communication via the I2C interface. DFRobot SEN0252
No product available!
Minicomputer Rockchip RK3328 quad-core processor and 1GB RAM. The module has two Ethernet ports, USB 2.0 port and USB type C. It is equipped with a microSD card slot. The kit includes a CNC metal case. FriendlyELEC NanoPi R2S
No product available!
Vision Edge computing platform with ARM Cortex-A53 1.2 GHz 64-bit quad-core processor, ARM Cortex-R5 600 MHz dual-core processor, embedded Mali400 graphics processor and FPGA chip. MYIR VECP Starter Kit
No product available!
The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+
No product available!
LPCXpresso55S16 evaluation kit with LPC55S16 microcontroller with ARM Cortex-M33 core. The board contains built-in LPC-Link2, audio subsystem, accelerometer, USB interfaces and Arduino connectors. NXP LPC55S16-EVK
No product available!
The MIMXRT1062DVL6A Processor Evaluation Kit, which runs up to 600 MHz, has 256 MB of SDRAM, 512 MB of Flash and 64 QSPI Flash. NXP MIMXRT1060-EVK
No product available!
Starter kit with the Kinetis K32 L2B microcontroller, integrated with the OpenSDA programmer-debugger, LCD display, accelerometer and MEMS magnetometer and USB connector. Conclusions compatible with Arduino. NXP FRDM-K32L2B3
No product available!
SWITCH FOR CHANDELIER v2 - PLATEBOARD AND CONTROLLED LAYOUT