- Out-of-Stock
AVT3218 B - power controller with LCD display. Self-assembly set
ID: 570670
AVT kit for self-assembly of a power controller with LCD display. AVT3218 B
Description
The system is a power regulator of devices powered from 230V AC mains. The prototype served as a power regulator for the soldering iron, but the system can also work with other types of heaters up to 300W. In addition, it works well with classic bulbs and with LED bulbs and compact fluorescent lamps with "dimmable" function. Successfully passed the tests also with a commutator motor, squirrel cage and transformer. However, the power of such receivers, other than resistive, should not exceed 100W. A certain limit of the system is the minimum power, which should not be less than 10W.
Project AVT 3218 EdW 03/18
properties
- Adjustment range 0 ... 100%, with 1% increments
- Maximum load 300W
- 230V AC power supply
- Phase adjustment
- The degree of adjustment presented on the LCD display
- Remembering the last setpoint
- Adapted to the Z50 housing
Included
- Set of parts for self-assembly of the regulator
570670
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Tomasz Frenchman
Retired
No product available!
No product available!
No product available!
No product available!
A functional expander for NUCLEO and Arduino with a set of environmental sensors: pressure, humidity, temperature and light intensity and also a 5-position joystick and LED RGB.
Retired
No product available!
Starter kit with the Altera FPGA system from the MAX10 family, which in addition to the classic, configurable logical resources are equipped with a 12-bit ADC converter, Flash memory for the user and internal configuration memory. The set is equipped with Arduino system connectors and basic peripherals for project testing.
24h
Available quantity: 1
Magnetic Displacement Sensors, SOIC8, Honeywell Microelectronics & Precision Sensors, RoHS
Retired
No product available!
Miniature (22x13.5x6mm) WiFi module b / g / n with TCP and UDP protocols operating in standalone and access point modes. 2.0mm goldpin connector. The module is equipped with a UART interface, it is also possible to control GPIO lines (also as PWM). Powered by 3.3V. I-PEX connector
Delivery date unknown
No product available!
No product available!
No product available!
Quadia® Tegra® K1 SOC four-core computer supporting CUDA®, RoHS technology
Retired
No product available!
No product available!
Odroid UPS2 is a UPS designed to work with Odroid C1, C1 + and C2 computers. It is equipped with a lithium-polymer battery with a capacity of 3000 mAh
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1 m, cable in red
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1 m, cable in orange
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1m, cable in blue
Retired
No product available!
AVT kit for self-assembly of a power controller with LCD display. AVT3218 B