.png)
- Out-of-Stock
AVTMOD10
ID: 208757
FREQUENCY METER 1HZ ... 50MHZ
FREQUENCY METER 1HZ ... 50MHZ
Producer: AVT
The module of the ready, running frequency meter with the measuring range: 1Hz ... 50MHz. Its unquestionable advantage is the ability to measure with the subtraction or addition of an intermediate frequency, and this extends its application to the modernization of the design of radio receivers and newly constructed transceivers.
The module was created on the basis of the AVT2885 project "Frequency meter - Fmeter" published in the pages of Elektronika dla Wszystkich 11/2008
Basic parameters:
- range of measurements: 1Hz ... 50MHz
- the ability to work as a frequency meter or a digital scale
- ability to set the offset (intermediate frequency)
- amplitude of the measured waveform: 0.2 ... 1V
- module dimensions: 20x34x48mm
- power supply 7 ... 20VDC, 30mA
208757
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
This development board is based on the Raspberry Pi RP2350 microcontroller with an Arm Cortex-M33 or RISC-V Hazard3 core. It offers 2.4/5 GHz Wi-Fi, Bluetooth 5.0, and 8 MB of Flash memory, delivering high performance in a compact form factor. With a USB-C port and full Pico W compatibility, it\'s ideal for IoT projects, home automation, and learning to program. Elecrow RP2350 Pico W5 Board
Retired
No product available!
Crowtail-Sound Sensor 2.0 is an analog sound sensor with a built-in amplifier, intended for measuring sound intensity levels. Ideal for interactive projects, sound-responsive systems and acoustic monitoring.
Retired
No product available!
Crowtail-MOSFET 2.0 – switching module with IRF9540N MOSFET, 5–50 V DC, 5 V control, screw terminals
Crowtail-MOSFET 2.0 enables controlling devices powered with up to 50 V DC using a low-voltage signal from a microcontroller. It is used in projects requiring power isolation or switching, such as fans, LED strips or DC motors.
Retired
No product available!
The Crowtail-Linear Potentiometer-V2.0 module with a 10 kΩ slide potentiometer enables analog voltage adjustment in electronic projects. Dedicated to precise control of parameter values in regulation systems and user interfaces.
Retired
No product available!
Crowtail – BME280 Atmospheric Sensor 2.0 is a multifunctional environmental sensor measuring temperature, humidity, and pressure, with an I2C interface and low power consumption. It is used in weather applications, home automation, and mobile systems.
Retired
No product available!
Crowtail – GP02 GPS/BDS/GNSS is a compact positioning module with support for three navigation systems, accuracy below 2 m, and a UART interface. Used in projects requiring precise real-time positioning, such as data loggers, vehicle tracking, and field devices.
Retired
No product available!
Crowtail – Dual Coil Latching Relay Module 2.0 is an energy-efficient dual-channel latching relay that retains its state after power loss. Intended for use in automation systems, remote control, and battery-powered projects.
Retired
No product available!
Crowtail-Tilt Switch 2.0 is a simple digital sensor that detects a change in the module’s position along the vertical–horizontal axis. Used in projects requiring tilt detection, orientation signaling or activation depending on position.
Retired
No product available!
Black PETG filament with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, designed for FDM 3D printers.
Retired
No product available!
PETG filament (black) with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, intended for FDM 3D printers. Prusa Research
Retired
No product available!
PETG filament (Anthracite Grey) with 1.75 mm diameter and 1 kg net weight, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, designed for FDM 3D printers. Prusa Research
Retired
No product available!
PETG filament in Signal White color with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, intended for FDM 3D printers
Retired
No product available!
PLA filament (Galaxy Silver) with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, designed for FDM 3D printers
Retired
No product available!
Prusament PLA filament in Gravity Grey color with a 1.75mm diameter, designed for FDM 3D printers, manufactured by Prusa Research with parameter control along the entire spool
Retired
No product available!
PLA filament (Vanilla White) with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, intended for FDM 3D printers
Retired
No product available!
PLA filament in Azure Blue color with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, intended for FDM 3D printers
Retired
No product available!
FREQUENCY METER 1HZ ... 50MHZ