- Out-of-Stock

Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Light-Blue
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
---|
![]() |
Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
---|
![]() |
Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
---|
![]() |
A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
No product available!
No product available!
No product available!
No product available!
Raspberry computer case: Pi 3 model B +, Pi 3 model B, Pi 2 model B and Pi 1 model B + in blue. Made of plastic
No product available!
No product available!
No product available!
No product available!
No product available!
Electric tin extractor with 30W Velleman heater. It is equipped with a manual vacuum pump
No product available!
No product available!
X-MCIMX8M-EVK is an evaluation set with an i.MX 8MQuad processor (4 ARM Cortex-A53 cores (operating at 1.5 GHz) and an ARM Cortex-M4 core (operating at 266 MHz). This chip has 1 MB of L2 cache memory. There are 4 GB of LPDDR4 memory, 16 GB of eMMC 5.0 memory, 256 Mb of QSPI memory and a slot for microSD memory cards.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.51mm and an external diameter of 0.8mm.
No product available!
No product available!
SUPERLUMISATION MODULE RACK 3x3LED RED 60mA - A KIT FOR INDEPENDENT INSTALLATION
No product available!
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Light-Blue