- Out-of-Stock
CONTROLLER OF EYE CAMERAS - CONTINUOUS PLATE AND PROGRAMMED SYSTEM
Video technology is one of the fastest growing areas of electronics. Miniature cameras have better and better parameters and their price makes them increasingly used to monitor people and their property. When you want to observe one place, there is no problem with the location of the camera. The situation is different when the monitoring system is to cover relatively large areas. Then it becomes necessary to use turntables - mobile platforms from which the cameras mounted there according to the will of the operator can be remotely aimed at the most interesting area at the moment. OKO is the acronym for the Observatory of the Observation Camera. In fact, it is a universal stepper motor controller that can find various other applications.
The device is particularly recommended in monitoring systems
Selected parameters:
Download
Manufacturer
Responsible person
Cobbler Plus - adapter enabling connection of GPIO Raspberry Pi A +, B + and Pi 2 lines to the contact plate (2.54 mm). The version is assembled. Adafruit 2029
No product available!
T-Cobbler Plus - adapter enabling connection of GPIO Raspberry Pi A +, B + and Pi 2 lines to the contact plate (2.54 mm). Goldpin connectors are included, for self-assembly. Adafruit 1989
No product available!
FPC tape length 250 mm, 50 lines, pitch 0.5 mm. Adafruit 1682
No product available!
μHex is the first low-power controller which is compatible with Arduino. It is very suitable for the battery power supply environment. A 210mAh CR2032 cell battery could make it work 60 days long. DFR0343
No product available!
Complete Robot Kit with Romeo V2 All-in-one controller, Sharp GP2Y0A21 Distance Sensor, 9g micro servo which allow you to install sensors, servos and even do some prototypings. KIT0071
No product available!
The Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP/IP Embedded Ethernet Controller (datasheet).
No product available!
The DE0-Nano-SoC Development Kit presents a robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility
No product available!
Module for learning the basics of electronic engineering; illustrates the relationship between voltage, current, and allows the generation and observation of signals. It has the ability to sample the signal up to 200kSPS in a 16-bit converter. Powered from the USB port. ADALM1000
No product available!
Ribbon Cable, IDC Socket, IDC Socket, 40 Ways, 5.91 ", 150 mm, 2.54 mm
No product available!
No product available!
No product available!
FRAM memory with a capacity of 4kbit by Cypress Semiconductor, communicates via the I2C bus, the power supply voltage is in the range 2.7 - 3.6V. The system has an SOIC8 housing
No product available!
A small Li-Pol battery with a nominal voltage of 3.7 V and a capacity of 1350 mAh. Leaded wires, dimensions: 5 x 37 x 59 mm. Akyga LP503759
No product available!
Thermistor for THT assembly with a resistance of 10k, a temperature coefficient of 3380K and accuracy of 1%. The sensor body is Ø2.5x4mm
No product available!
KAmduino UNO is a development board with functionality and dimensions typical for Arduino UNO. Thanks to the built-in ATmega328P microcontroller and the FT231X chipset, the board can be programmed via a USB interface using the Arduino environment. KAmduino UNO
No product available!
K64 microcontroller with ARM® Cortex®-M4 core, 1MB Flash memory, 256kB RAM, 120MHz, SPI, I2C, I2S, UART, CAN, USB OTG, ADC, DAC, RTC, DMA, LQFP100
No product available!
CONTROLLER OF EYE CAMERAS - CONTINUOUS PLATE AND PROGRAMMED SYSTEM