- Out-of-Stock
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Clear
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
| Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
|---|
![]() |
| Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
![]() |
| Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
![]() |
| A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Clear |
![]() |
Dagu Rover 5 Tracked Chassis with Encoders |
Manufacturer
Responsible person
Module with a gesture and touch sensor. It recognizes 7 types of gestures and has 5 touch buttons. It is supplied with a voltage ranging from 3.3 V to 5 V and communicates via UART. DFRobot SEN0285
No product available!
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
No product available!
Module with a UV ultraviolet light sensor VEML6075. Enables measurement of the level of UVA (350-375 nm) and UVB (315-340 nm) radiation. It communicates via the I2C bus. DFRobot SEN0303
No product available!
The I2C-GPIO converter module is powered with the voltage of 5 V. It allows you to extend the number of digital pins of the Arduino-compatible board with an additional 16 IO pins. DFRobot DFR0013
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
No product available!
Opening/closing sensor designed for mounting on windows and doors. It is equipped with an RF wireless communication module operating at 433 MHz. Sonoff DW2 - RF
No product available!
Opening/closing sensor designed for mounting on windows and doors. It is equipped with a WiFi wireless communication module. Sonoff DW2
No product available!
Universal WiFi controlled switch. It can control one home appliance. Sonoff Basic R2 v2.2
No product available!
Wireless temperature and humidity sensor. It allows you to track changes in temperature and humidity in your home. Shelly H&T
No product available!
Power adapter with a microUSB socket designed for the Shelly H&T sensor. It allows you to replace the battery power of the sensor with a constant 5V power supply. Shelly H&T Usb Adapter
No product available!
Device for activating scenes and actions with WiFi communication. It can handle 3 connected input devices and show their status and control other connected Shelly relays, sensors or devices controlled by HTTP, MQTT or CoAP. Shelly i3
No product available!
Stylish light bulb with WiFi control function. Equipped with a brightness adjustment function, it allows you to control the range of white light (cold - warm). Designed for installation with a standard E27 socket. Shelly Vintage G125
No product available!
Button to activate scenes and actions with WiFi communication. It can operate 4 functions on one button and control other connected Shelly relays, sensors or devices controlled by HTTP, MQTT or CoAP. Shelly Button 1
No product available!
Wireless CNG natural gas sensor with WiFi function. It allows for continuous control of natural gas installations in the home and quick detection of gas leaks. Shelly GAS
No product available!
Panel light controller with WiFi function. Equipped with a brightness adjustment function. It has been designed for installation in a flush-mounted box and can work with any type of light bulb. Shelly Dimmer 2
No product available!
Wireless flood sensor with WiFi function. It allows you to detect a water leak and supervise underfloor heating. Shelly Flood
No product available!
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Clear