- Out-of-Stock
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks. The module is compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B+ / 400 boards. The CAN interface is supported by the MCP2515 and MCP2551, and the RS485 by the ST3485 IC.
Attention!
Manufacturer
Responsible person
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
No product available!
TTL - RS485 converter 5V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.
TTL - RS485 converter 3,3V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.
Raspberry Pi computer built into the keyboard. It is equipped with a 1.8 GHz quad-core ARM Cortex-A72 processor and 4 GB DRAM. Raspberry Pi 400
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
No product available!
Wireless temperature and humidity sensor. It allows you to track changes in temperature and humidity in your home. Shelly H&T BLACK
No product available!
HAT module with MCC 118 chip, designed for Raspberry Pi. Provides 8 analog inputs with a resolution of 12 bits, sampling rates up to 100 kS/s and range +/-10 V. Digilent 6069-410-000
No product available!
HAT MCC 128 module for Raspberry Pi. Provides 8 analog inputs with a resolution of 16 bits, sampling rates up to 100 kS/s and a range of +/-10 V, +/-5 V, +/-2 V, or +/-1 V. Digilent 6069-410-001
No product available!
HAT MCC 134 module for Raspberry Pi. Provides 4 inputs with a resolution of 24 bits dedicated to thermocouples type J, K, R, S, T, N, E or B. Digilent 6069-410-002
No product available!
HAT MCC 152 module for Raspberry Pi. It provides 2 analog outputs with a resolution of 12 bits and a range of 0-5 V and 8 digital inputs/outputs. Digilent 6069-410-003
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometers and microphones. Digilent 6069-410-004
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometer and microphone. Two coaxial cables are included. Measurement Computing MCC 172
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007
No product available!
The expansion board with the LoRaWAN SX1302 and GNSS L76B module is dedicated to Raspberry Pi minicomputers. The kit includes the 868M antenna, GPS and necessary cables. Waveshare SX1302 LoRaWAN Gateway HAT
No product available!
The module with the LoRaWAN ASR6501 system and an external antenna, designed for the M5Stack sets. M5Stack U117
No product available!
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway
No product available!
Alkaline battery A27 12V 7.6x27.3 mm with a capacity of 25 mAh
No product available!
Black ABS ESD filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy ABS ESD Black
No product available!
100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 1.14 mm
No product available!
ToF distance sensor module based on the VL6180X system. It offers a range of 2 to 50 cm and communicates via the I2C interface
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.