KAmodRPI RS485 CAN HAT - CAN and RS485 module for Raspberry Pi

3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX

The PCIe (D) adapter enables the installation of a high-speed M.2 NVMe SSD on the Raspberry Pi 5, offering a significant improvement in read and write speeds compared to microSD cards. It supports system boot from the SSD, making it a suitable solution for performance-demanding projects such as file servers, database systems, or advanced development environments using the Raspberry Pi 5.

A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)

Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)

The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption

Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)

NFC reader module dedicated to the Raspberry Pi. It is based on the PN532 operating in the 13.56 MHz frequency range. Waveshare PN532 NFC HAT

Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT

The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN

The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589

The PCIe TO 2-CH M.2 HAT+ expands the functionality of the Raspberry Pi 5 by enabling the installation of two NVMe SSDs, offering significantly improved read/write performance and the option to boot from disk. With its compact design, support for 2230/2242 form factors, and built-in power monitoring, the adapter is well-suited for server solutions, NAS projects, multimedia systems, and advanced industrial applications.

Micro HDMI to HDMI adapter with two power supply modes and dual 4K output support, designed to work with Raspberry Pi 5 and Raspberry Pi 4B, enables reliable connection of displays and UART signal transmission. It is suitable for multimedia projects, presentation systems, and embedded solutions where a compact and functional solution for video support and serial communication is required.

PCIe to Ethernet Adapter for Raspberry Pi 5. Extends the functionality of the Raspberry Pi 5 by adding a Gigabit Ethernet port with the high-performance RTL8111H controller. The adapter connects to the Raspberry Pi 5 using a 16-pin PCIe cable. Waveshare PCIe TO Gigabit ETH Board (C)

PCIe TO MiniPCIe GbE USB3.2 HAT+ expansion with EG25-G modem provides reliable LTE connectivity, high-speed data transfer via USB 3.2 ports, and efficient wired Ethernet connection. Dedicated for Raspberry Pi 5, it offers a comprehensive communication solution for industrial projects, edge routers, IoT gateways, and positioning applications.

The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)

PCIe To M.2 E KEY HAT+ adapter expands the capabilities of the Raspberry Pi 5 with support for high-speed Wi-Fi/Bluetooth network cards in M.2 E Key format. It supports direct PCIe connection and Bluetooth integration via USB. Robust antenna connectors and compliance with the HAT+ standard make it an ideal solution for IoT projects, network gateways, and compact routers based on the Raspberry Pi 5.