- Out-of-Stock
RGB LED Flexible Strip with 4-pin Driver Connector 500mm (Red / Green / Blue) (17406)
This LED strip contains 3 RGB (Red, Green, Blue) LEDs in every 50mm section.
The LED strip may be cut to fit into installations if necessary. Cutting marks are printed on the strip and must be adhered to. The smallest workable segment of the single color strip is 50mm long and contains 3 top Surface Mount LEDs.
During soldering, Celsius degrees and the soldering time of 10 seconds. Solder connection on the strip.
There is a double-sided adhesive tape attached to the back of the strips. Care must be taken to provide a clean surface.
This strip is not waterproof.
Features:
• Supplied with 4 terminal plug for easy connection to RGB LED driver for multiple effects, colors, brightness and speed (sold separately)
• 500mm long strip of RGB LEDs
• UL, CE and RoHS compliant
specs:
Max Operating Voltage: 12V
Max Power Consumption: 14.4W / 1.2A (per meter)
Beam Angle: 120 °
Service Life: 50,000 hours
Length: 500mm
requires:
12V power source
Optional RGB LED driver for special effects (sold separately, see "Accessories" tab below)
PRODUCT ID: 371000053
Data sheet
Manufacturer
Responsible person
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
KAmodMIC_MEMS is a module with a microphone type SPV1840LR5H-B. Thanks to the built-in amplifier with 100-fold signal amplification, the voltage at the module output can be measured using, for example, an ADC converter
No product available!
The CY8CKIT-049-42xx Prototyping Kit is a low cost prototyping platform for customers wishing to test and develop applications using the PSoC® 4 device family. CY8CKIT-049-42XX
No product available!
No product available!
No product available!
WS2812S is a three-color, closed in a housing with a controller, RGB diode in an SMD5050 housing with PLCC-6 terminals. The diodes can be connected in series, thanks to which you can control whole chains of such diodes with three wires.
No product available!
The general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3108
No product available!
The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3109
No product available!
This version has a 56:1 metal gearbox with a 0.276"-long, 4 mm-diameter D-shaped output shaft. Key specs at 6 V: 250 RPM and 250 mA free-run, 45 oz-in (3.3 kg-cm) and 3.3 A stall. Pololu 1450
No product available!
HK RGB LED Flexible Strip with 4-pin Driver Connector 500mm (Red / Green / Blue) (17406)