- Out-of-Stock
DEV-13037 SparkFun Block for Intel® Edison - Battery
Description:
The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech. Powered by the Intel® Atom ™ SoC dual-core CPU and including an integrated WiFi, Bluetooth LE, and a 70-pin connector to attach a veritable slew of shield-like "Blocks" which can be stacked on top of each other. It's no wonder how this little guy is in the world of electronics!
The Battery Block brings a single cell LiPo Charger and 400mAh battery to power Intel® Edision and expansion blocks. The Battery board can be used with 500mA charge current. The power switch removes the battery from the microUSB cable. If you need more battery life, it is possible to gently peel the battery off, de-solder the wires, and replace it with a larger cell. If you can remove the battery, it is also possible to continue stacking blocks. It is necessary to find an alternative mounting point for your battery. Go wireless with Edison!
If you are looking for an Intel® Edison stack, check out this Hardware Pack. It will provide you with a mechanical strength for stacking Blocks on your Edison!
Note: This block requires specific SparkFun Edison Blocks. Check the Hookup Guide in the Documents section below for more information.
Note: This item is not eligible for same-day shipping policy. Sorry for any inconvenience this may cause.
includes:
Documents:
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. 32GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. Capacity 64GB, Android operating system installed. The set includes a microSD adapter. Hardkernel
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. Capacity 64GB, installed Linux operating system. The set includes a microSD adapter. Hardkernel
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid XU4 computers. Capacity 64GB, Android operating system installed. The set includes a microSD adapter. Hardkernel
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. 128GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. 128GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid XU4 computers. 128GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid XU4 computers. 128GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel
No product available!
Switch mode power supply with 12V output voltage and 1A current. It has a DC 5.5x2.1 plug and an EU plug. The power supply has built-in overload, overvoltage and short-circuit protection. ESPE-1212-W2E
No product available!
Rasberry Pi compatible FPGA module integrating Xilinx Zynq-7010, 512 MB DDR3L SDRAM, 4 USB ports, Ethernet port and 16 MB Flash memory. Trenz Electronic TE0726
No product available!
Li-Po battery 3.7V / 320mAh, PCM safety, connector + JST-BEC 2,54 socket, 2 pins, cable length 150mm
No product available!
Expansion module for NanoPi Duo2, equipped with an Ethernet port, serial port, audio and USB. It has a built-in quad-band SIM800C GSM / GPRS module. FriendlyELEC NanoPi Duo2 IoT-2G
No product available!
NanoPi Duo2 is a small PCB equipped with the SoC Allwinner H3 system, RAM memory with a capacity of 256MB and a built-in WiFi / Bluetooth module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. FriendlyELEC NanoPi Duo2
No product available!
LOGO! Text display TD with LED backlight designed for LOGO! 8 controllers. Powered by 12/24V voltage, it allows displaying 6 lines of text, 20 characters each. Siemens 6ED1055-4MH08-0BA0
No product available!
NanoPi Duo2 is a small PCB equipped with the SoC Allwinner H3 system, RAM memory with a capacity of 512MB and built-in WiFi / Bluetooth module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. FriendlyELEC NanoPi Duo2
No product available!
Starter kit with LOGO! 8 230RCE, software and necessary accessories. Siemens 6ED1057-3BA03-0AA8
No product available!
DEV-13037