.png)
- Out-of-Stock
Prusament PETG Anthracite Grey 1kg, filament 1.75mm
ID: 1201827
8594173675438
PETG filament (Anthracite Grey) with 1.75 mm diameter and 1 kg net weight, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, designed for FDM 3D printers. Prusa Research
Description
Prusament PETG Anthracite Grey is designed for 3D printing parts requiring increased mechanical strength, good temperature resistance and long-term durability in everyday use. The filament is manufactured by Prusa Research under a controlled production process including continuous diameter monitoring, color consistency control and mechanical property testing. Each spool features an individual QR code allowing access to the actual production data of the specific batch.
PETG material is characterized by low shrinkage and excellent layer adhesion, reducing the risk of warping even when printing larger parts without an enclosed chamber. The filament is suitable for enclosures, brackets, mounting components and parts exposed to moderate mechanical loads and moisture. Compared to PLA, it offers higher impact resistance and flexibility, with slightly lower fine-detail resolution.
Features
- Material: PETG
- Color: Anthracite Grey
- Filament diameter: 1.75 mm
- Diameter tolerance: ±0.02 mm
- Net weight: 1 kg
- Printing temperature: 250 ±10°C
- Heatbed temperature: 80 ±10°C
- Recommended print sheet: Textured, Satin
- Low shrinkage and reduced warping
- Excellent layer adhesion
- High mechanical strength
- Manufacturing: Prusa Research
1201827
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 1 kg
- Diameter
- 1,75 mm
- Colour
- Gray
- Type of packaging
- Spool
Other products in the same category (16)
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
No product available!
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
Curved soldering tip with a 0.5mm diameter tip for WEP 926 soldering station
Retired
No product available!
3.2D soldering tip, flat screwdriver 5.5mm in diameter, for WEP 926 soldering station
Retired
No product available!
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
No product available!
MT41K512M16HA-125 is an 8Gb DDR3 DRAM that operates at up to 800MHz at a low voltage of 1.35V, ideal for systems requiring high bandwidth and energy efficiency. With a 512Mx16 organization and an operating temperature range of 0°C to 90°C, this memory offers fast data access and reliability in a variety of applications such as servers and industrial computers.
Retired
No product available!
5V / 3.1A eXtreme power supply with microUSB plug for all Raspberry Pi computers (including Pi 3 model B and Pi 3 model B +)
Retired
No product available!
Antenna with built-in LNA amplifier with high sensitivity, for mounting in a device using a GPS module. The antenna has a 25mm cable, terminated with a U.FL plug (IPEX). Dimensions of the device: 9 x 9 x 4mm
Retired
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
Kit: MAXimator, MAXimator Expander, ZL32PRG - USB Blaster PRO
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Retired
No product available!
PETG filament (Anthracite Grey) with 1.75 mm diameter and 1 kg net weight, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, designed for FDM 3D printers. Prusa Research