- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
Flashforge Finder - 3D printer with USB, WiFi and Cloud
ID: 579651
Easy-to-use and intuitive 3D printer with a touch screen and USB, WiFi and cloud file transfer support. The printer is fully assembled and ready to use. Flashforge Finder
Description
Flashforge Finder is a modern and intuitive to use 3D printer from Flashforge. It was created for use in education - both in schools and at home. A characteristic feature of the model is that the device is very easy to use. The control is done using a convenient touch display, and print files can be sent in the most convenient way of your choice - via USB, mass storage or WiFi. The printer is fully assembled and ready to use immediately. The printer has a working area of 140 x 140 x 140 mm, so that the user can print quite complex elements.
The printer has been equipped with numerous safeguards - an encapsulated print head and secured cables, thanks to which the device can also be used by younger 3D printing amateurs. The printer has an unheated table, which protects the user against burns. In addition, the table has an ejection mechanism, which greatly facilitates the process of removing printouts.
The device is controlled by means of a comfortable and transparent 3.5" display with a touch panel. An interesting feature, rarely available in 3D printers is the ability to preview the printout on the display screen when selecting a file.
The filament is placed in a specially prepared container built into the printer, and the exchange is simple and intuitive. The printer supports the basic 1.75 mm PLA filament available in various colors.
The printer works with FlashPrint software, which has a simple and intuitive interface and has intelligent support. It is equipped with 8 GB of internal memory for storing files. The process of sending files for printing can be done in many ways - from a USB cable connected to a computer, through a USB stick, to WiFi or a cloud.
The set includes a filament spool and the necessary tools to make work with the printer more permanent.
Features
- Number of extruders: 1
- Extruder diameter: 0.4 mm
- Maximum extruder temperature: 240 ° C
- Print speed: 10 to 100 mm / s
- Supported filaments: PLA, WOOD, TPU95
- Filament diameter: 1.75 mm
- Print area: 140 x 140 x 140 mm
- Print thickness: 0.1 to 0.4 mm
- Print accuracy: ± 0.2 mm
- 3.5 "touch display
- Built-in 8 GB memory
- Communication: USB cable, USB memory, Ethernet, WiFi, Cloud
- Software: FlashPrint
- Output file format: GX / X
- Input file format: 3MF, STL, OBJ, FPP, BMP, JPG, PNG, JPEG
- Power supply: 100 - 240 V AC
- Power: 60 W
- Sound level: 50 dB
- Working temperature: 18 to 30 ° C
- Dimensions: 420 x 420 x 420 mm
- Weight: 11 kg
Kit contains
- 3D printer Flashforge Finder
- Filament spool 250 g
- Power cord
- USB cable
- 16 GB flash drive
- Screwdriver
- Extrusion marrow
- A set of keys
- Filament tube
- Glue stick
- PTFE tube
- Grease
579651
Data sheet
- Printing technology
- FDM (FFF)
- Extruder Quantity
- 1
- Type of extruder
- Direct
- Nozzle diameter
- 0,4 mm
- Max. extruder temperature
- 240°C
- Max. bed temperature
- Brak
- Supported filaments
- PLA
- Print Speed
- 100 mm/s
- Build volume
- 140x140x140mm
- Filament sensor
- Tak
- Bed level sensor
- Tak
- Built-in camera
- Nie
- Removable bed
- Tak
- Resume printing
- Nie
- Communication
- USB/Ethernet/WiFi/Cloud
- Storage media
- Flash drive/Built-in memory
- Length
- 420 mm
- Width
- 420 mm
- Height
- 420 mm
- Weight
- 11 kg
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Pmod DPG1 is a module with a differential pressure sensor, based on the NXP MP3V5010DP system. The PCB also includes an analogue-digital ADCS7476 converter from Texas Instrument. The module allows to detect the pressure difference between two ports. The SPI interface is used for communication with the module. Digilent 410-333
Retired
No product available!
relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080, you can determine the relative humidity of the environment with up to 14 bits of resolution. Digilent 410-347
Retired
No product available!
With an on board Microchip PIC16 MCU, two-axis joystick on a center button, a trigger button, and a programmable RGB LED capable of 24-bit color, the Pmod JSTK2 is ideally suited for Digilent microcontroller or FPGA-based projects that require proportional control from the user, such as robotic applications. Digilent 410-330
Retired
No product available!
NanoPi NEO is a miniature board with the all-in-one SoC Allwinner H3 chip (ARM Cortex-A7) with built-in Ethernet communication. Works with Ubuntu MATE, Debian, etc. It can be powered by the microUSB port. The board also contains a USB port, a serial port and a 36-pin GPIO connector
Retired
No product available!
NanoPi NEO is a miniature board with the all-in-one SoC Allwinner H3 chip (ARM Cortex-A7) with built-in Ethernet communication. Works with Ubuntu MATE, Debian, etc. It can be powered by the microUSB port. The board also contains a USB port, a serial port and a 36-pin GPIO connector.
Retired
No product available!
NanoPi NEO Air is a miniature board with the SoC Allwinner H3 quad-core system (ARM Cortex-A7) with built-in WiFi and Bluetooth communication. It works with Ubuntu MATE, Debian etc. It can be powered by a microUSB port
Retired
No product available!
NanoPi A64 single board computer (SoC) with A64 Allwinned processor, SoC (ARM Cortex A-53) and dedicated FriendlyCore-Xential and UbuntuMATE operating systems
Retired
No product available!
Minicomputer with a quad-core processor (up to 1.4GHz) and 1 GB of DDR3 RAM, 8 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T2
Retired
No product available!
Minicomputer with an octa-core processor (up to 1.4GHz) and 2 GB of DDR3 RAM memory, 8 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T3
Retired
No product available!
No product available!
Orange Pi 2G-IoT is a minicomputer with a powerful ARM Cortex-A5 processor. The computer is equipped with a GSM / GPRS (2G) module, 256 MB LPDDR2 RAM, a WiFi module and a CSI camera connector, USB Host, OTG, 26 GPIO and a microSD card slot. Works with Android, Ubuntu and Debian systems
Retired
No product available!
Orange Pi Prime Development Board H5 Quad-core 2GB DDR3 SDRAM Mini PC
Retired
No product available!
Orange Pi Win 1GB DDR3 RAM A64 Quad-core 64-Bit WiFi Mini PC
Retired
No product available!
Orange Pi Win Plus A64 Quad-core 2GB WIFI Development Board
Retired
No product available!
Orange Pi Win and Win Plus computer case (transparent), made of plastic. It protects and protects your computer against dust and mechanical damage. Properly prepared openings allow you to use all the sockets that Orange Pi Win and Orange Pi Win Plus have been equipped with
Retired
No product available!
Allwinner H5 Quad-core, 512MB DDR3, 8GB eMMC, Bluetooth, Wi-Fi, HDMI
Retired
No product available!
Easy-to-use and intuitive 3D printer with a touch screen and USB, WiFi and cloud file transfer support. The printer is fully assembled and ready to use. Flashforge Finder