- Out-of-Stock
DP750-100 - Micsig high voltage differential probe
ID: 1182397
High voltage differential probe. It is characterized by good measurement parameters: 100 MHz band and working voltage up to 750 V. The probe has two attenuation factors: 50X and 500X and uses the UPI interface. Micsig DP750-100
Description
The Micsig High Voltage Differential Probe is a probe for measuring the voltage difference between two test points, not related to ground potential. The device allows you to observe waveforms without grounding, variables and single measurements. The probe has good measurement parameters: with a 100 MHz band and an operating voltage up to 750 V. The probe has two attenuation factors: 50X and 500X set by the user. It is equipped with a UPI interface. It can also be powered via the USB port.
The device is compatible with all oscilloscopes.
Features
- Band: 100 MHz
- Rise time: 3.5 ns
- Damping: 50X, 500X
- Accuracy: 2%
- Maximum Differential Test Voltage (DC + AC PK): 75V (50X), 750V (500X)
- Maximum common mode input voltage (DC + AC PK): CAT II 1000V
- Input Reference Noise: ≤120mVrms (50X), ≤120mVrms (500X)
- Common Mode Rejection Ratio: ＞ 80dB (DC), ＞ 60dB (100KHz), ＞ 50dB (1MHz)
- Input impedance: 8MΩ/1.25pF (differential), 4MΩ/2.5pF (one input to ground)
- Output voltage: ≤1.5V
- Value overflow alarm
- Input cable length: approx. 15 cm
- Output cable length: approx. 100 cm
- Power supply: UPI or 5V DC USB
- Power: 1 W
- Power supply dimensions: 80 x 37 x 22 mm
- I/O module dimensions: 49 x 25 x 12.5 mm
Kit contains
- Micsig DP750-100 measuring probe with input and output cables
- USB cable
1182397
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
Micsig differential probe from the DP series designed for high-voltage and differential signal measurements. Offers 100 MHz bandwidth and supports voltage measurements up to 700 V. Features a standard BNC connector and USB Type-C power supply. The current product revision includes a new enclosure with three function buttons. Micsig DP700
zł1,014.23
Delivery date unknown
No product available!
The Micsig SATO2002 is a dual-channel tablet oscilloscope with a 200 MHz bandwidth, offering a maximum sampling rate of 1 GSa/s and a memory depth of 70 Mpts. Equipped with an 8-inch touchscreen LCD, it simplifies automotive diagnostics, including testing charging systems, ignition, and CAN and LIN networks
zł3,398.93
24h
Available quantity: 1
Available
Other products in the same category (16)
Kit for controlling soil moisture of cultivated plants. It contains the HAT Mini module, soil moisture sensors and pots and seeds of herbs: basil, coriander and rosemary. Pimoroni PIM518
Retired
No product available!
Kit for controlling soil moisture of cultivated plants. It contains the HAT Mini module, soil moisture sensors and pots and seeds of chilli. Pimoroni PIM519
Retired
No product available!
A module with a spectrum sensor that operates in the visible light range (450-650 nm). It allows you to measure and characterize a light source or check how the tested surface absorbs or reflects light at specific wavelengths. Pimoroni PIM412
Retired
No product available!
Module with a UV ultraviolet light sensor VEML6075. It enables measurement of the level of UVA (350-375 nm) and UVB (315-340 nm) radiation. It communicates via the I2C bus. Pimoroni PIM460
Retired
No product available!
Module with 6-axis IMU motion sensor that combines a 3-axis accelerometer and a 3-axis magnetometer in one system. It communicates via the I2C bus. Pimoroni PIM376
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM526
Retired
No product available!
The system of a practical clock with an extremely simple design is equipped with a readable LED display, an alarm clock with a snooze function, and battery backup of the clock operation after a power failure
Retired
No product available!
Kit with DA7280 vibration motor driver module and LRA (Linear Resonant Actuator) motor. It allows you to add vibration feedback from the device to the project. SparkFun ROB-18247
Retired
No product available!
No product available!
The Winstar WEH001602ABPP5N00100 OLED display is a character display with dimensions of 80×36×10 mm, capable of displaying 16 characters on 2 lines. It comes with a built-in WS0010-TX controller and operates within a power supply voltage range of 4.8–5.3 V and temperature range of -40°C to 80°C, offering excellent readability thanks to OLED technology.
Retired
No product available!
Kit with Jetson Mate base board designed for SoM modules NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 110991411
Retired
No product available!
Jetson Mate motherboard for NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 114992562
Retired
No product available!
ToF distance sensor (Time of flight) with a range of up to 2.5 m. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SPX-17716
Retired
No product available!
RFID antenna designed for UHF RFID tags. It allows you to increase the effective range of tags to about 2.5 cm. SparkFun SPX-15113
Retired
No product available!
OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. It is equipped with Qwiic connectors and communicates via the I2C interface. SparkFun LCD-17153
Retired
No product available!
High voltage differential probe. It is characterized by good measurement parameters: 100 MHz band and working voltage up to 750 V. The probe has two attenuation factors: 50X and 500X and uses the UPI interface. Micsig DP750-100