- Out-of-Stock
BPI - I2C GPIO extend board
ID: 234745
Banana Pi - I2C GPIO extend board
Banana Pi - I2C GPIO extend board
Overview:
This module is designed specifically for expand for the GPIO of the Banana Pi a which can effectively solve the banana send IO port insufficient. It use PCF8574 chip to expand 8 Bidirectional IO. The module connection to the Banana Pi through I2C bus.
There are 8 I2C address in the module and user can choose one of them through setup the “ADDR” jumper. User also can choose 5V or 3.3V electric level. Module with isolation protection, can effectively prevent external high voltage damage to the Banana Pi. Multiple module can cascade.
Features:
- 8 Bidirectional IO
- 8 I2C-address
- Isolation protection
- Use wiringPi API , sample code
- 100 kHz I2C-bus interface (Standard-mode I2C-bus)
Parameters:
- Working voltage: 2.5V-6V
- IO voltage: 3.3V or 5.5
- Expand 8 Bidirectional IO
- I2C bus
- 100 kHz I2C-bus interface (Standard-mode I2C-bus)
- -40°C to +85°C operation
Typical Application:
- LED signs and displays
- Key pads
- Instrumentation and test measurement
- Driver numeric display
- Drive the lattice screen
Download
234745
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
24h
Available quantity: 8
Available
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 78
Available
Other products in the same category (16)
Solarbotics GMPW-Y YELLOW Wheel with Encoder Stripes, Silicone Tire
Retired
No product available!
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121
Retired
No product available!
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122
Retired
No product available!
The adapter is designed for mounting LEGO wheels on an axis with a diameter of 2 mm used, among others. in Pololu mini motors with a plastic gear. Pololu 1001
Retired
No product available!
A small motor with a plastic gear 120:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1125
Retired
No product available!
A small motor with a plastic gear 180:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1593
Retired
No product available!
A small motor with a plastic gear 180:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1594
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
MinIMU-9 v2 Gyro, Accelerometer, and Compass (L3GD20 and LSM303DLHC Carrier)
Retired
No product available!
LSM303DLM 3D Compass and Accelerometer Carrier with Voltage Regulators
Retired
No product available!
MMA7361L 3-Axis Accelerometer ±1.5/6g with Voltage Regulator
Retired
No product available!
LPY550AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ą500°/s and ą2000°/s Ranges
Retired
No product available!
No product available!
Banana Pi - I2C GPIO extend board