- Out-of-Stock
XTRINSIC-SENSE-BOARD
ID: 235217
Evaluation Board for Freescale Xtrinsic Sensors - Sensors, Altitude & Pressure Measurement, Magnetic Field & Physical Position Detection
For use with Freescale FRDM-KL25z and Raspbery Pi Host Platforms
XTRINSIC-SENSE-BOARD
XTRINSIC MEMS Sensors, Altitude & Pressure Measurement, Magnetic Field & Physical Position Detection, element14
For use with Freescale FRDM-KL25z and Raspbery Pi Host Platforms
The XTRINSIC-SENSE board demonstrates the capabilities of Freescale’s Xtrinsic sensors. The Xtrinsic Sensor board includes interfacing and support for the following host platforms:
The sensor board comes equipped with three of Freescales new-generation XTRINSIC MEMS sensors.
- The MPL3115 (U1) is designed for accurate measurement of temperature and pressure
- The MAG3110 (U2) for detection of magnetic fields
- The MMA8491 (U3) for measurement of physical positions
Content:
- Xtrinsic MEMS module
Download:
235217
You might also like
Starter kit from NXP Semiconductors (formerly Freescale) based on the Kinetis KL25Z microcontroller with an Arm Cortex-M0+ core, featuring an OpenSDA debug interface, capacitive touch slider, RGB LED and Arduino R3 compatible connectors. NXP FRDM-KL25Z
zł139.00
24h
Available quantity: 2
Available
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 52
Available
Other products in the same category (16)
Needle bending needle, for precise glue application, Flux 0.413mm internal diameter and 0,7176mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.337mm internal diameter and 0,6414mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,311mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.25mm internal diameter and 0,5144mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,26mm internal diameter and 0,4636mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,21mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.81mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Silicone protective case for the Huskylens vision module. It was made of a soft and flexible material, it perfectly fits the shape of the tile. DFRobot FIT0647
Retired
No product available!
Module with a CCS811 air quality sensor for measuring the concentration of carbon dioxide (CO2) and volatile organic compounds (VOC) in the air. It communicates via the I2C interface. DFRobot SEN0339
Retired
No product available!
Evaluation kit with SiFive Freedom E310 microcontroller with RISC-V (ISA) architecture. It includes 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 microcontroller for USB support and JTAG interface, Qwiic and USB Type-C connector. SparkFun DEV-15594
Retired
No product available!
Cable with a length of 150 mm, on one side terminated with a Qwiic connector, and on the other side with single female goldpin connectors. It allows you to connect Qwiic modules, e.g. with development board. SparkFun CAB-14988
Retired
No product available!
Extension module for Raspberry Pi designed to build the user interface. It is equipped with a 2.4-inch TFT LCD display, microphones, speaker, buttons, joystick and RGB LEDs. SparkFun DEV-16653
Retired
No product available!
Adapter board from SODIMM200-2.5 to 2.54mm connectors
Retired
No product available!
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601
Retired
No product available!
Evaluation kit with LittleBee GW1N-1 FPGA chip. Offers 1152 LUTs and 864 Flip-Flops (FF). The board has an FPC connector for the display and a USB type C. Sipeed Lichee Tang Nano
Retired
No product available!
Video splitter for connecting one input device to 2 receivers. Maximum 4K resolution supported. Lanberg SPV-HDMI-0002
Retired
No product available!
Evaluation Board for Freescale Xtrinsic Sensors - Sensors, Altitude & Pressure Measurement, Magnetic Field & Physical Position Detection
For use with Freescale FRDM-KL25z and Raspbery Pi Host Platforms