- Out-of-Stock
Analog and digital filters
ID: 32332
Jacek Izydorczyk, Jacek Konopacki
| Author: Jacek Izydorczyk, Jacek Konopacki ISBN: 83-89105-47-0 Format: B5, 568 pages Soft binding Publisher: Jacek Skalmierski's Computer Laboratory |
| About the book |
| Many books and guides have been written about analog and digital and C-switched filters. Among them, there are few items (especially in Polish), in which all of the mentioned filters are described. The purpose of this book is to fill this gap. Although it has a monographic character, the goal of the authors was not to present all known methods of filter design, but to present the basic knowledge on this subject as clearly and simply as possible. The book is intended for all those interested in the problem of filters, and not only for specialists. The reader only needs orientation in the basics of electronics. It contains many examples and practical comments helpful in designing filters, therefore we hope that students and engineers will use it as a kind of guide. |
32332
Other products in the same category (16)
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
Retired
No product available!
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
Retired
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
Retired
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22663
Retired
No product available!
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a D24 tip
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a B2 tip
Retired
No product available!
Module with 4 LED displays (three LEDs in red, yellow and green) dedicated to the Raspberry Pi. Perfect for use as a traffic light. SB Components 06977
Retired
No product available!
6-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21802
Retired
No product available!
4-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 06670
Retired
No product available!
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
Retired
No product available!
The PCA9685 servo driver module is dedicated to micro: bit educational boards. It allows you to control 16 PWM channels. SB Components 09183
Retired
No product available!
Module with RFID reader. It is equipped with a buzzer and communicates via UART or USB interface. SB Components 20669
Retired
No product available!
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC converter and measures the pressure between the two inlets up to 10 kPa. SB Components 20638
Retired
No product available!
USB-UART/I2C converter based on the MCP2221 chip. It enables communication of devices with UART or I2C interface with a computer. SB Components 21246
Retired
No product available!
The Murata LQM18DH6R8M70L is a high-quality 6.8 µH inductor supporting up to 330 mA current, ideal for compact applications such as DC/DC power supplies and mobile devices. It features low series resistance (ESR) and excellent stability for efficient operation, and its SMD 0603 package allows easy integration into modern electronics designs.
Retired
No product available!
Jacek Izydorczyk, Jacek Konopacki