Module with ATmega8 and 500mA protection

Description

The module is used to build prototypes and designs based on the popular ATmega8 microcontroller. It is possible to mount another microcontroller from the AVR family, if only pin outs coincide with ATmega8. A module with ATmega328P microcontroller is also available.

The pins are matched to the prototype board. The module can be mounted in such a board and further develop your project, and thanks to the derived ISP connector, you can quickly upload a new program. You no longer have to waste time connecting the microcontroller with a quartz resonator and connect individual pins to the programmer. The advantage of the module are the port pins of the ATmega8 microcontroller that are lead out consecutively

properties

• Integrated circuit: ATmega8
• Stabilizer: LM1117-3.3
• Protection: polymer fuse
• Clock frequency: 16MHz
• Programming: ISP
• Outputs / output connector: 2 x 14pin connector, matching the prototype board
• LED signaling: yes
• Configuration: selection of reference voltage AREF VCC / GND (jumper)
• Additional information:
  • The pins of the microcontroller ports are sequentially connected
  • Built-in RESET button
  • Built-in stabilizer + 3.3V
  • The voltage + 3.3V leads to the supply of additional modules
  • The USB / UART MOD-05 converter can be easily connected
• Power supply: 4.5-5 V
• Dimensions: 39 mm x 24 mm
• RoHS: yes

Description of leads

Included

• Assembled MOD-01.Z Module with ATmega8 with protection
• A set of connectors for self-assembly (14-pin 2 pcs)

To download

• User's manual