Module with ATmega328P and 500mA protection

Module with ATmega328P and 500mA protection

Description

The ATmega328P module will allow you to build even bigger projects than ATmega8. More memory, more work frequency and the ability to program using the Arduino IDE software increases the module's capabilities.

It is possible to upload applications written in Arduino IDE, thanks to which you can run projects based on Arduino, using the ATmega328P microcontroller.

The pins are matched to the prototype board. The module can be mounted in such a board and further develop your project, and thanks to the derived ISP connector, you can quickly upload a new program. You no longer have to waste time connecting the microcontroller with a quartz resonator and connect individual pins to the programmer. The advantage of the module are the pins of the ATmega328P microcontroller port derived sequentially.

Technical data:

• Code and name of the module: MOD-10 Module with ATmega328P and security
• Integrated circuit: ATmega328P
• Stabilizer: LM1117-3.3
• Protection: polymer fuse
• Clock frequency: 16MHz (quartz resonator)
• Programming: ISP
• Outputs / output connector: 2 x 14pin connector, 2 x 14pin connector, matching the prototype board
• Power supply: +4.5 V to +5 V
• LED signaling: yes
• Dimensions: 39 mm x 24 mm
• Configuration: selection of AREF VCC / GND reference voltage, jumper
• Additional information:
  • the pins of the microcontroller ports are output sequentially
  • built-in RESET button
  • built-in stabilizer + 3.3V
  • the voltage + 3.3V leads to the supply of additional modules
  • the possibility of simply connecting the USB / UART MOD-05 converter
• RoHS: yes

Set contains:

• assembled MOD-10.Z ATmega328P module with protection
• set of connectors for self-assembly (14-pin 2 pcs)