- Out-of-Stock
GPIO adapter for Raspberry PI with LED
ID: 557587
The Raspberry Pi GPIO connector adapter allows you to output signals from Raspberry Pi to the contact plate. Two LEDs indicate +3.3V and +5V power supply
GPIO adapter for Raspberry PI with LED
Description
The Raspberry Pi 3 and Raspberry Pi 2 / + GPIO connector adapter allows you to output Raspberry Pi signals to the contact plate. Two LEDs indicate +3.3V and +5V power supply.
All pins are independent , this means that the adapter can also be used for other purposes. For example, you can connect SPI 2x5 pin or LCD programming tape with a 2x7 pin connector to the contact plate. The sold version has a double-row 2x13 pin connector.
On request , other types of connectors can be installed.
Technical data:
- Code and name of the module: MOD-22 GPIO adapter for Raspberry PI with LED
- Output / connector: output built-in goldpin connectors
- LED signaling: yes
- Dimensions: 45 mm x 16 mm
- RoHS: yes
Set contains:
- assembled MOD-22.Z GPIO adapter for Raspberry PI with LED
- set of connectors for self-assembly (13-pin 2 pcs)
557587
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
CM Dafermos, Eduard Feireisl
Delivery date unknown
No product available!
No product available!
The Siglent SDG1032X, featuring a 30 MHz maximum output frequency and two output channels, is an indispensable function generator for engineers and technicians. With a sampling rate of 150 MSa/s, 16kpts memory, and 16-bit vertical resolution, this device provides high precision and reliability. Its compact design, along with standard USB and LAN interfaces and an optional GPIB, facilitates seamless integration into measurement systems and automation of tasks. Siglent SDG1032X
Retired
No product available!
47:1 Metal Gearmotor 25Dx52L mm HP with 48 CPR Encoder
Retired
No product available!
High Efficiency 10 LED High Voltage
Boost Converter, TSOT23, ON Semiconductor, RoHS
Retired
No product available!
Permanent cylindrical neodymium magnet with a diameter of 12 mm and a height of 3 mm.
Retired
No product available!
No product available!
HK NTM Prop Drive 50-60 Series 380KV / 2665W (23521)
Retired
No product available!
20-pin straight goldpin female connector with a pitch of 2 mm. For THT mounting. PB20S_2.00mm
Retired
No product available!
ArduCam camera module with autofocus designed for Raspberry Pi. It was equipped with a matrix (Sony IMX219) with 8 MPix resolution and an integrated IR filter. To connect the camera with Raspberry Pi is implemented using a CSI connector. Autofocus allows sharpening in the range from 4 cm to infinity. ArduCAM B0122
Retired
No product available!
MYIR MYC-C7Z020 is a single board computer module based on the MYC-C7Z020 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
Retired
No product available!
MINIATURE, STEREOPHONE POWER AMPLIFIER WITH 2X3W POWER - SYSTEM HOLDED AND STARTED
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glow in the Dark Green
Retired
No product available!
No product available!
No product available!
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070024
Retired
No product available!
The Raspberry Pi GPIO connector adapter allows you to output signals from Raspberry Pi to the contact plate. Two LEDs indicate +3.3V and +5V power supply