.png)
- Out-of-Stock
Modular LED matrix 8x8 with controller
ID: 557604
MOD-39.Z
Modular LED matrix 8x8 with controller
Description
The module with an LED matrix enables building LED displays of various sizes, depending on the number of connected blocks. The built-in connectors allow you to connect the modules in series, without the need to connect each matrix to the control system. The modules can be combined both vertically and horizontally.
The LED matrix has 64 points of light 8x8 LED and has dimensions of approx. 60x60 mm. The module is controlled using 3 control signals IN, CLK, LOAD . It also has an OUT signal for connecting the next module. There is also room for an additional power connector, which allows you to supply additional power, which is required when connecting more matrices.
Technical data:
- Code and name of the module: MOD-39.Z Modular LED matrix 8x8 with controller
- Integrated circuit: MAX7219CWG
- Input connector: VCC, IN, CLK, LOAD, GND
- Outputs / output connector: VCC, OUT, CLK, LOAD, GND
- Power: +5 V
- LED signaling: no
- Dimensions: 24 mm x 53 mm (dimensions of the control module)
- Additional information:
- the modules can be connected in series, the output of the first module to the input of the second module, etc.
- space for the power connector required when connecting more matrices
- RoHS: yes
Set contains:
- assembled MOD-39.Z Modular LED matrix 8x8 with controller
- set of connectors for self-assembly (8-pin 2 pcs, 6-pin 2 pcs)
557604
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
This transducer is about 45mm in diameter and has 4Ω impedance and should be run at about 5W
Retired
No product available!
SPIRIT1 868 MHz low power RF module with integrated microcontroller
Delivery date unknown
No product available!
Read/Write analog front end for 125 kHz RFID Basestation, SOIC16, EM Microrlectronic, RoHS
Retired
No product available!
Bitscope Micro is a miniature measuring instrument with a USB interface, it can act as an 8-channel logic analyzer (40MS / s, 3.3V or 5V) or a 2-channel oscilloscope (bandwidth up to 20MHz). In addition, Bitscope can generate a clock signal as well as sinusoidal, triangular, rectangular and saws
Retired
No product available!
High performance WLAN USB module which enables the Raspberry Pi to connect to a Wi-Fi network
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 256kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, 64-LQFP
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, 64-LQFP
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-144
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-100
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 256kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-100
Retired
No product available!
Kit for building a minisumo robot on a crawler chassis. It has a bulldozer, control board and a set of caterpillars. Robot version for self-assembly, requires additional motors and four AA batteries. Pololu 3124
Retired
No product available!
Expansion module kit with Arduino compatible connectors for building a Zumo robot. The module includes a dual engine controller, buzzer and user button, as well as a 3-axis accelerometer and compass. Pololu 2508
Retired
No product available!
Bi-directional converter enabling communication of any device equipped with an RS232 serial port with 802.11 b / g / n wireless WiFi network. The module can work as a TCP client / TCP or UDP server. The layout is "transparent" for communicating systems, which does not doubt facilitate communication between them.
Retired
No product available!
USB A-microB USB cable with a length of 1m, white-blue cable, flat, green plugs illuminated with RGB diode
Retired
No product available!
1m USB A-microB USB cable, white-blue cable, flat pink RGB LED illuminated plugs
Retired
No product available!
The module is used to build prototypes and designs based on the popular ATmega8 microcontroller. It is possible to mount another microcontroller from the AVR family, if only pin outs coincide with ATmega8. MOD-01.Z
Retired
No product available!
MOD-39.Z