- Out-of-Stock
New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
ODROID-C1+/C2 blue case
ID: 559481
The case has openings for all outputs including the GPIO port making it a great fit for projects that are connected to external hardware.
We have designed these cases for those who appreciate the beauty of the naked PCB board, but still want to protect the ODROID-C1+/C2 from the dust and the elements. The semi-transparent case has openings for all outputs including the GPIO port making it a great fit for projects that are connected to external hardware.
There are openings for Ethernet, 4 x USB Host, microUSB, HDMI and DC Jack. The cover over GPIO pins can be easily removed by cutting of a few ribs and will give you easy access to the GPIO port. If you are using the USB-UART Module kit, the cable can also be routed through this opening.
Fit the ODROID-C1+/C2 in the case using the locking tabs and secure it using two included screws through the screw holes on the bottom side. A spare screw is included in the package. You will need a small screwdriver. This case has more vent holes on the bottom side and has a slot for your MicroSD card.
Features
- Strong & Durable Polycarbonate Plastic
- Size : 90 x 59 x 28 mm
- Weight : 32g
Download
The drawings of the plastic case is supplied in AutoCAD format.
559481
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
Retired
No product available!
No product available!
No product available!
ARM Cortex-M3 CPU, Low power, 128kB Flash, 16kB RAM, USB, 3xUART, 2xI2C, 2xSPI, ADC, DAC, STM, LQFP48, RoHS
Retired
No product available!
SUPERLUMISING MODULAR LIGHT 9XLED WHITE HEAT WARM 20mA - SELF-MOUNTING KIT
Retired
No product available!
No product available!
Adafruit 659 - FLORA - Wearable electronic platform: Arduino-compatible - v2
Retired
No product available!
No product available!
SBC6000X Single Board Computer, AT91SAM9261
Delivery date unknown
No product available!
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. 410-328
Retired
No product available!
Ambient Light Sensor, SI1145, connects to the I2C bus pads. Adafruit 1981
Retired
No product available!
No product available!
AQUARIUM DRIVER - A SET OF PRINTED TILES AND A PROGRAMMED SYSTEM
Delivery date unknown
No product available!
Brushless motor Turnigy 2209 1050 kV outrunner type (HK27303)
Retired
No product available!
The grapple is used for precise operations when replacing SMD and BGA circuits. It allows you to lift small electronic components without using tweezers
Retired
No product available!
The case has openings for all outputs including the GPIO port making it a great fit for projects that are connected to external hardware.