- Out-of-Stock
3.2" LCD Touchscreen (C) - Waveshare 8805
ID: 562395
320x240, 3.2 inch Multicolor Graphic LCD, with touch screen and stand-alone controllers
Overview
3.2 inch 320*240 DOTS Multicolor Graphic LCD, with touch screen and stand-alone controllers
Key Parameters
| LCD Controller | ILI9325 |
|---|---|
| Touch Screen Controller | XPT2046 |
| LCD Type | TFT |
| LCD Interface | 16-bit parallel |
| Touch Screen Interface | SPI |
| Backlight | LED |
| Colors | 65536 |
| Resolution | 320*240 DOTS |
Interface
Note: this product should work with MCUs with 2.2V~3.6V IO voltage ONLY.
| PIN NO. | SYMBOL | DESCRIPTION | FUNCTION |
|---|---|---|---|
| 1 | 5V | 5V power supply | When powered from 5V supply, Pin 1 & Pin 2 as power input, Pin 33 & Pin 34 provide 3.3V output. |
| 2 | GND | Ground | GND |
| 3 | D0 | Data pin | D0-D15 |
| 4 | D1 | ||
| 5 | D2 | ||
| 6 | D3 | ||
| 7 | D4 | ||
| 8 | D5 | ||
| 9 | D6 | ||
| 10 | D7 | ||
| 11 | D8 | ||
| 12 | D9 | ||
| 13 | D10 | ||
| 14 | D11 | ||
| 15 | D12 | ||
| 16 | D13 | ||
| 17 | D14 | ||
| 18 | D15 | ||
| 19 | CS | LCD chip select | Low active |
| 20 | RS | Instruction/Data register selection | RS = 1 : Data Register RS = 0 : Instruction Register |
| 21 | WR | Write | WR = 0, RD = 1 |
| 22 | RD | Read | WR = 1, RD = 0 |
| 23 | RESET | Reset the controller chip | Low active |
| 24 | NC | Not connect | Not connect |
| 25 | BLVCC | 5V or 3.3V | Backlight VCC |
| 26 | BLGND | Ground | Backlight GND |
| 27 | BLCNT | Backlight brightness adjustment | Control the backlight brightness via PWM |
| 28 | TP_IRQ | Touch screen interrupt | Low level while the touch screen detects pressing |
| 29 | TP_CS | Touch screen chip select | Low active |
| 30 | TP_SCK | Touch screen SPI clock | connects to SPI SCK |
| 31 | TP_SI | Touch screen data input | connects to SPI MOSI |
| 32 | TP_SO | Touch screen data output | connects to SPI MISO |
| 33 | 3.3V | 3.3V power supply | When powered from 3.3V supply, Pin 33 & Pin 34 as power input, Pin 1 & Pin 2 keep NC. |
| 34 | GND | Ground |
562395
Data sheet
- Screen type
- TFT
- Diagonal (inch)
- 3,2
- Resolution
- 320 x 240 px
- Interface
- Parallel
- Touch
- Yes
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. For Raspberry Pi (B, A+, B+, 2), Banana Pi, Banana Pro, BeagleBone Black
zł189.00
24h
Available quantity: 4
Available
5inch HDMI LCD + Bicolor case
zł165.48
24h
Available quantity: 3
Available
2.8 inch Arduino Touch LCD Shield
zł85.45
24h
Available quantity: 6
Available
Other products in the same category (16)
Assembled universal 2-channel relay module. AVT1914 C
Retired
No product available!
Printed circuit board and programmed system for the electromagnetic transom control. AVT1919 A +
Retired
No product available!
AVT kit for self-assembly of the electromagnetic lock controller. AVT1919 B
Retired
No product available!
Assembled electromagnetic lock controller. AVT1919 C
Retired
No product available!
Printed circuit board and programmed system for the alarm control panel cooperating with the motion sensor. AVT1925 A +
Retired
No product available!
AVT kit for self-assembly of the alarm control panel cooperating with the motion sensor. AVT1925 B
Retired
No product available!
Assembled alarm control panel cooperating with the motion sensor. AVT1925 C
Retired
No product available!
AVT kit for self-assembly of the power distributor. AVT1930 B
Retired
No product available!
Assembled power divider, designed to supply several receivers from one voltage source with more power. AVT1930 C
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool. XF-ABS-175-GRAY
Retired
No product available!
Flexible PVC cover for 6M3 connector, for ØD = 3.5mm cable, length L = 24mm, width W = 6.5mm, black, RoHS
24h
Available quantity: 20
No product available!
The AM receiver of the DCF77 signal with the MAS6180 system, allows to receive the frames of the synchronization signal from the time standard, using the carrier frequency of 77.5kHz. Thanks to this module, it is possible to create a clock with automatic date and time synchronization. The module has a ferrite antenna. modDCF77
Retired
No product available!
Module with Tegra X1 SoC system containing four 64-bit ARM Cortex A57 cores and a Maxwell graphic layout consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX1
Retired
No product available!
Arducam-F Rev.C+ Camera module shield with OV2640 for Arduino UNO MEGA2560 DUE. ArduCam B0051+B0011
Retired
No product available!
Arducam-LF Rev.C+ Camera module + 3.2 inch LCD for arduino UNO MEGA2560 DUE. ArduCam B0052+B0011
Retired
No product available!
320x240, 3.2 inch Multicolor Graphic LCD, with touch screen and stand-alone controllers