- Out-of-Stock
AVT5551 A + - remote switch with Bluetooth. PCB with programmed layout
ID: 562810
PCB and programmed circuit for remote control switch with two relays. AVT5551 A +
Description
Remote controlled switch with two relays. Since the Bluetooth interface is used for the control, the switch can be controlled via a computer, tablet or smartphone. The commands controlling the switching on and off of relays are in text format. A special android application has been written to operate the switch, but any terminal program can be used to send commands. Each of the relays can be switched on permanently or for a programmed time.
Recommendations: the switch will be useful for remote opening of wicket, lighting control and other automation systems, eg building.
Project AVT 5551 EP 09/16
properties
- Control of two independent relays acting as actuators
- Each of the relays can be turned on, off or on for a period of 1 second to 1 minute
- Remote control via short commands via Bluetooth
- You can use any device with Bluetooth interface to send commands
- Module HC-05
- DC power supply in the range 5 ... 12V
- Power consumption up to 170 mA at 5V supply voltage
Included
- PCB board and programmed layout
562810
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
No product available!
ARK terminal connector spring 10-pin, pitch 2.5 mm, non-detachable.
Retired
No product available!
ARK terminal connector spring 11-pin, pitch 2.5 mm, non-detachable.
Retired
No product available!
ARK terminal connector spring 12-pin, pitch 2.5 mm, non-detachable.
Retired
No product available!
ARK terminal connector spring 4-pin, pitch 5.00 mm, non-detachable
Retired
No product available!
Minicomputer with built-in NVIDIA Jetson Nano module with 4 GB RAM. In an aluminum housing, it has the JetPack installed. Seeed Studio 110061361
Retired
No product available!
ADS-B antenna made of fiberglass working at 1090 MHz with 8.5dB amplification). 1.2 m long. Pimoroni COM-B3301
Retired
No product available!
Switch with relay for installation in a socket. It offers the ability to control one device with an operating current of up to 16 A and voltage from 110 to 240V AC or from 24 to 30V DC. Shelly Plus 1PM
Retired
No product available!
A set dedicated to control BLDC motors. It consists of the X-NUCLEO-IHM07M1 module with the L6230 controller, the NUCLEO-F302R8 development board, and the BLDC motor and power supply. STMicroelectronics P-NUCLEO-IHM002
Retired
No product available!
A miniature linear actuator that has a stroke range of up to 30 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
Retired
No product available!
A miniature linear actuator that has a stroke range of up to 80 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
Retired
No product available!
A miniature linear actuator that has a stroke range of up to 100 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
Retired
No product available!
A mini welding machine designed to connect 18650 type battery cells
Retired
No product available!
Module with USB 3.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI and DVP interface. ArduCAM B0317
Retired
No product available!
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
Retired
No product available!
360° laser scanner. It performs measurements with a frequency of 6 revolutions per second and has a range of up to 8 m. Waveshare Triangulation LiDAR LD14
Retired
No product available!
PCB and programmed circuit for remote control switch with two relays. AVT5551 A +