- Out-of-Stock
Seeed studio LoRa / GPS HAT - extension for Raspberry Pi
ID: 565703
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 minicomputers (model B) and Raspberry Pi 3. It has a LoRa communication module (868 MHz) and a GPS module. Seeed Studio 113990254
Description
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 (model B) and Raspberry Pi 3 minicomputers. It has a LoRa communication module (868 MHz) and a GPS module. In addition to the HAT Raspberry Pi LoRa / GPS HAT cover itself, there are also mounting elements (nuts, screws, distances) and an antenna for the communication module (868 MHz).
properties
- Compatible with Raspberry Pi 2 Model B and Raspberry Pi 3
- LoRa module:
- Frequency: 868 MHz
- Programmable Baudrate up to 300 kbps
- Maximum sensitivity: -148 dBm
- Power consumption: approximately 10.3 mA
- Full integration of the 61 Hz synthesizer
- Modulations: FSK, GHSK, MSK, GMSK, OOK
- Preamble detection
- Dynamic RSSI range: 127 dB
- Built-in temperature sensor and low battery indicator
- GPS module:
- Power consumption: 20 ... 25 mA
- Compatible with GPS and SBAS systems
- Programmable Baudrate up to 300 kbps
- UART transmission speed: 4800-115 200 bps (default: 9600 bps)
- Refresh rate: 1-10 Hz (default 1 Hz)
- Protocol: NMEA 0183, PMTK
- Localization accuracy: <2.5 m
- Support for EASY technology (based on AGPS without external memory)
- Sensitivity: -148 dBm
- Dimensions: 60 x 53 x 25 mm
- Weight: 30 g
Included
- 1 x Raspberry Pi LoRa / GPS HAT extension
- 4 x Distances
- 4 x Screws (M2.5 x 5)
- 4 x Nuts (M2.5)
- 1 x Antenna (868 MHz)
565703
Data sheet
- Compatible with
- Raspberry Pi 3/2/B+
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
Small GPS location module with L80-39 GPS chip, USB and TTL two ports,easy to be used with Raspberry Pi, Arduino, STM32 and other kind of micrcontrollers. The GPS module uses NMEA0183 communication protocol, integrated ultra-small SMA antenna connector. DFRobot TEL0119
zł201.61
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 147
Available
Other products in the same category (16)
The STM32F7 discovery kit allows users to develop and share applications with the STM32F7 Series microcontrollers based on the ARM®Cortex®-M7 core
Retired
No product available!
Motion MEMS and environmental sensor expansion board for STM32 Nucleo, equipped with Arduino UNO R3 connector layout; designed around the LSM6DSL 3D accelerometer and 3D gyroscope, the LSM303AGR 3D accelerometer and 3D magnetometer, the HTS221 humidity and temperature sensor and the LPS22HB pressure sensor. The board interfaces with the STM32 microcontroller via the I²C pin
Retired
No product available!
Alicja Żarowska-Mazur, Dawid Mazur
24h
Available quantity: 1
No product available!
No product available!
No product available!
No product available!
The RoboClaw motor controller can control a pair of brushed DC motors using USB serial, TTL serial, RC or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 7.5 A per channel (15 A peak). Pololu 3284
Retired
No product available!
Romeo family evaluation kit with Bluetooth 4.0 module. It is based on the STM32F103RET6 microcontroller and has a built-in four-channel DC motor driver. DFRobot DFR0398
Retired
No product available!
Angular socket JST XH cable-plate, male, 2 pins, pitch 2,5mm, THT, 250V, 3A, ROHS
Retired
No product available!
The ESD-14 straight tweezer is 120mm long. Anti-static, anti-magnetic, acid-resistant, hardness HRC40. The gripping part is coated. Perfect for work in SMD electronics
Retired
No product available!
Dagmara Kiraga, Zasław Adamaszek
Delivery date unknown
No product available!
No product available!
HK HK HSP (HiSpeed) 1/18 Scale 4WD Electric Power On-Road/Drift PRO - Blue (94802PRO)
Retired
No product available!
Black housing with computer flap Raspberry Pi model 3/2 / B + (RS Pro BLK)
Retired
No product available!
A set of Raspberry Pi 3 Premium Kit in an elegant box. RS Pi 3 Kit
Retired
No product available!
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 minicomputers (model B) and Raspberry Pi 3. It has a LoRa communication module (868 MHz) and a GPS module. Seeed Studio 113990254