.png)
- Out-of-Stock
640x384, 7.5inch E-Ink raw display, three-color
ID: 569489
640x384, 7.5inch E-Ink raw display, three-color, SPI interface, without PCB
Overview
This is an E-Ink raw display, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Specifications
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 170.2mm × 111.2mm × 1.18mm
- Display size: 163.2mm × 97.92mm
- Dot pitch: 0.255 × 0.255
- Resolution: 640 × 384
- Display color: red, black, white
- Grey level: 2
- Full refresh time: 31s
- Refresh power: 38mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Selection Guide
Note: To fastly get started with these raw displays, please consider the universal driver board: e-Paper Driver HAT
| Part Number | Colors | Grey Level | Resolution | Display size (mm) | Outline Dimension (mm) | Full Refresh Time (s) | Partial Refresh Time (s) | Interface |
|---|---|---|---|---|---|---|---|---|
| 1.54inch e-Paper | black, white | 2 | 200x200 | 27.60 × 27.60 | 31.8 × 37.3 | 2 | 0.3 | SPI |
| 1.54inch e-Paper (B) | red, black, white | 2 | 200x200 | 27.60 × 27.60 | 31.8 × 37.3 | 8 | N/A | SPI |
| 1.54inch e-Paper (C) | yellow, black, white | 2 | 152x152 | 27.51 × 27.51 | 31.8 × 37.3 | 27 | N/A | SPI |
| 2.13inch e-Paper | black, white | 2 | 250x122 | 48.55 × 23.71 | 59.2 × 29.2 | 2 | 0.3 | SPI |
| 2.13inch e-Paper (B) | red, black, white | 2 | 212x104 | 48.55 × 23.71 | 59.2 × 29.2 | 15 | N/A | SPI |
| 2.13inch e-Paper (C) | yellow, black, white | 2 | 212x104 | 48.55 × 23.71 | 59.2 × 29.2 | 15 | N/A | SPI |
| 2.7inch e-Paper | black, white | 2 | 264x176 | 57.29 × 38.19 | 70.4 × 45.8 | 6 | N/A | SPI |
| 2.7inch e-Paper (B) | red, black, white | 2 | 264x176 | 57.29 × 38.19 | 70.4 × 45.8 | 15 | N/A | SPI |
| 2.9inch e-Paper | black, white | 2 | 296x128 | 66.89 × 29.05 | 79.0 × 36.7 | 2 | 0.3 | SPI |
| 2.9inch e-Paper (B) | red, black, white | 2 | 296x128 | 66.89 × 29.05 | 79.0 × 36.7 | 15 | N/A | SPI |
| 2.9inch e-Paper (C) | yellow, black, white | 2 | 296x128 | 66.89 × 29.05 | 79.0 × 36.7 | 15 | N/A | SPI |
| 4.2inch e-Paper | black, white | 2 | 400x300 | 84.80 × 63.60 | 90.1 × 77.0 | 4 | N/A | SPI |
| 4.2inch e-Paper (B) | red, black, white | 2 | 400x300 | 84.80 × 63.60 | 90.1 × 77.0 | 15 | N/A | SPI |
| 4.2inch e-Paper (C) | yellow, black, white | 2 | 400x300 | 84.80 × 63.60 | 90.1 × 77.0 | 15 | N/A | SPI |
| 7.5inch e-Paper | black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 6 | N/A | SPI |
| 7.5inch e-Paper (B) | red, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 31 | N/A | SPI |
| 7.5inch e-Paper (C) | yellow, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 31 | N/A | SPI |
Package content
Weight: 0.044 kg
Note: This is a raw display, for easy testing and comparing, please consider the one with driver board: 7.5inch e-Paper HAT (B)
- 7.5inch e-Paper (B) x1
569489
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 7,5
- Resolution
- 640 x 384 px
- Interface
- SPI
- Touch
- No
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
E-Ink display module with a resolution of 400x300 pixels and a diagonal of 4.2 inches. The display has a built-in controller, communication takes place via the SPI interface. Waveshare 4.2inch e-Paper Module
zł151.08
24h
Available quantity: 1
Available
400x300, 4.2inch E-Ink raw display
zł84.34
24h
Available quantity: 5
Available
Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT
zł37.76
24h
Available quantity: 4
Available
Module with e-Paper display, 2.7" diagonal and 264x176 px resolution. Communication via SPI interface. Waveshare 2.7inch e-Paper HAT
zł99.45
24h
Available quantity: 38
Available
Other products in the same category (16)
T-Cobbler adapter enabling connection of GPIO Raspberry Pi A +, B +, Pi 2 and Pi 3 lines to the contact plate (2.54 mm). Adapter assembled, including connecting tape
Retired
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module. The module has a 2.54 mm goldpin connector. WRL-13774
Retired
No product available!
SBC computer with SoC Allwinner H8 (8-core Cortex-A7 2 GHz, PowerVR SGX544MP) equipped with: in 2 GB RAM memory, 8 GB eMMC memory, WiFi a / b / g / n, Bluetooth, SATA 2.0 interface
Retired
No product available!
No product available!
Mains power supply 5V, 1A, cable terminated with a mini-USB plug. DC / 230V AC
Retired
No product available!
The module contains two tiny cores, an x86 (Quark) and a 32-bit ARC architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks
Delivery date unknown
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module
Retired
No product available!
The RoboClaw motor controllers from Ion Motion Control (formerly Orion Robotics) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 7.5 A per channel (15 A peak).
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
ScanaPLUS is a robust, versatile and multi-application 9 Channels logic analyzer
Retired
No product available!
The Ardumoto Shield is an easy-to-use dual motor controller for Arduino. Combined with an Arduino, the Ardumoto makes a fantastic controller platform for RC vehicles or even small autonomous robots. KIT-13201
Retired
No product available!
4 channel Logic Analyzer and Digital signal generator KIT, designed to decode and analyze SPI, I2C, UART, 1-WIRE and CAN
Retired
No product available!
No product available!
640x384, 7.5inch E-Ink raw display, three-color, SPI interface, without PCB