- Out-of-Stock
4.3" HDMI LCD Color Screen 480x272 with Touch Panel for Raspberry Pi - Waveshare 11865
ID: 569504
HDMI 4.3 "480 x 272 pixel color LCD module with touch panel for Raspberry Pi
Description
Color LCD module with a resistive touch panel designed for Raspberry Pi computers. 4.3 "display and 480 x 272 pixel resolution The module has an HDMI controller that greatly simplifies screen connection to Raspberry Pi computers. Supports all Raspberry Pi models, only RPi 1 model B and Pi Zero models require additional HDMI cable connection. Drivers are available from the operating system level, the display module allows you to turn off the backlight to save energy.
The resistive touch panel is controlled from the GPIO port using the SPI interface.
properties
- Diagonal: 4.3 inches
- Color LCD display
- Image resolution: 480 × 272 pixels
- Resistive touch panel
- Supports Raspberry Pi Zero / Zero W / Zero WH / A + / B + / 2B / 3B (RPi 1 models B and Pi Zero require additional HDMI cable connection)
- Drivers are available from the operating system level.
- Display interface: HDMI
- Touch panel interface: SPI
- The ability to turn off the backlight to save energy
Included
- Color LCD module with a resistive touch panel
- Board with HDMI connectors
- scriber
- Mounting kit for Raspberry Pi
- DVD
569504
Data sheet
- Diagonal (inch)
- 4,3
- Resolution
- 480 x 272 px
- Interface
- HDMI
- Touch
- Yes
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The seven-inch touch screen for Raspberry Pi computers has a resolution of 800 x 480, and thanks to the frame and spacers, it is possible to create an integrated device, such as a control panel, based on Raspberry PI. RPI Raspberry Pi Display
zł289.00
24h
Available quantity: 25
Available
Other products in the same category (16)
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Retired
No product available!
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Retired
No product available!
128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A
Retired
No product available!
Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW
Retired
No product available!
External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01
Retired
No product available!
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Retired
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1
Retired
No product available!
HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface
Retired
No product available!
Wall charger with USB and USB type C sockets. Supports QC3.0 + PD3.0 fast charging protocol with a maximum current of up to 3 A. USAMS US-CC085
Retired
No product available!
A spatula for removing prints from the 3D printer table. Made of stainless steel, it is durable and handy
Retired
No product available!
A needle with a diameter of 0.4 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
Retired
No product available!
Aluminum tensometer beam, allowing weight measurement up to 2 kilograms. It has four wires. It is used in kitchen scales and portable scales
Retired
No product available!
Educational set for building robots based on Totem construction elements. Designed for beginners, it allows you to create 7 robot structures based on the included assembly instructions. Totem TKR-RK1
Retired
No product available!
HDMI 4.3 "480 x 272 pixel color LCD module with touch panel for Raspberry Pi