.png)
- Out-of-Stock
AVT1725 A +
ID: 208266
MICRO-SCREEN STROKE CONTROLLER - PLATE AND CONTROLLED LAYOUT
MICRO-SCREEN STROKE CONTROLLER - PLATE AND CONTROLLED LAYOUT
Producer: AVT
Drivers of stepper motors are very popular. Their use allows, for example, the construction of advanced tools, such as milling machines or numerically controlled drilling machines.
The presented motor controller enables the smooth regulation of the rotational speed and direction of rotation of bipolar (4-wire) and unipolar (5- or 6-wire) motors using the same potentiometer. The range of rotational speed changes has been divided into two subranges: 1 ... 10 and 7 ... 100 cycles per second. The microchip control is performed with 1/64 or 1/8 step resolution. The controller can be powered by 8 ... 25Vdc and the output current is up to 2A / channel (coil). Additionally, it has been equipped with a time function (time regulated smoothly in the range of 0.5 ... 70s).
The prototype of the system was created to control the trolley drive for the so-called Glidetrack camera and is perfectly suited for obtaining very low speeds of the stepper motor. However, it should be remembered that despite the high resolution of microstep control in some engines, the motion of the shaft may not be perfectly smooth and there may be slight oscillations.
The set includes a printed circuit board, programmed layout and documentation.
A detailed description in EP8 / 13 or 
208266
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Retired
No product available!
128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A
Retired
No product available!
Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW
Retired
No product available!
External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01
Retired
No product available!
External enclosure designed to protect, transfer and store data on M.2 SSD drives with NVMe or SATA interface. Unitek S1204B
Retired
No product available!
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Retired
No product available!
The 74LVC1G07GV is a compact, energy-efficient single-channel logic buffer with an open-drain output, designed for digital systems operating within a voltage range of 1.65 V to 5.5 V. It offers fast switching, high drive capability, and stable performance in applications such as LED control, data lines, and interfaces with mixed logic level standards.
Retired
No product available!
100-pin connector (socket) for Raspberry Pi CM4 modules. 0.4 mm pitch, 1.45 mm height
Retired
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1
Retired
No product available!
50 W soldering iron for Bakon BK950D station. Works with soldering tips from the T13 series
Retired
No product available!
T13 soldering tip with a K-type cut tip designed for the Bakon BK950D station
Retired
No product available!
Black metal casing for Raspberry Pi 4 model B minicomputers. Equipped with active cooling ICE Tower Low Profile
Retired
No product available!
HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface
Retired
No product available!
HAT type power supply module with cooling fan designed for Raspberry Pi 4 model B. Provides flexible power supply to the minicomputer via DC 5.5x2.5 mm connector, XH2.54 mm connector, microUSB or USB type C connector
Retired
No product available!
MICRO-SCREEN STROKE CONTROLLER - PLATE AND CONTROLLED LAYOUT