- Out-of-Stock

ROSA3D PC + PTFE filament for 3D printing with a diameter of 1.75 mm. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range of 270°C to 295°C, and the temperature of the bed during printing is in the range of 90°C to 120°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and high accuracy of the diameter and roundness of the filament.
Filament PC+PTFE (polycarbonate + polytetrafluoroethylene) is a technical material, aimed at professionals. It is characterized by high mechanical and temperature resistance. The material is perfect for making parts with good dimensional stability that have to work at high temperatures. Elements printed from this filament can work at temperatures around 120°C. Due to the low values of the static and dynamic friction coefficient, it can be used in the production of sliding elements. Printouts made of PC + PTFE can be machined to obtain a perfectly smooth surface.
The material can be used with both Direct and Bowden printers. The manufacturer recommends the use of a closed chamber and adhesive preparations. Due to the high printing temperatures, it is necessary to install a full-metal heatbreak (without a Teflon tube inside). The filament should be dried before printing at 110°C for at least 3 hours.
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
ROSA3D filament made of high-quality PET-G granules with the addition of carbon fibers. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G + CF
No product available!
An advanced 3D printer that offers unique multi-color printing capabilities thanks to the Automatic Material System (AMS). It supports a wide range of filaments, including PLA, PETG, TPU, ABS, as well as carbon fiber-reinforced polymers, ensuring a maximum hot end temperature of up to 300°C and a print speed of up to 500 mm/s. The device is equipped with advanced features such as Bambu Micro Lidar, a chamber monitoring camera and power loss recovery, making it an ideal solution for demanding industrial and hobby projects. Bambu Lab X1-Carbon Combo
No product available!
Starter kit with STM32F411RE microcontroller (512 kB Flash, Cortex-M4), with ST-Link / v2 programmer-debugger. Modified version compatible with the original Nucleo. Waveshare XNUCLEO-F411RE
No product available!
No product available!
No product available!
No product available!
No product available!
AVT kit for self-assembly of LED Easter eggs. AVT3160 B
No product available!
No product available!
No product available!
NanoPi NEO Core is a small PCB equipped with the SoC Allwinner H3 chip and 512MB RAM. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C, I2S interface. The board can be powered from the Micro USB connector. FriendlyELEC NanoPi NEO Core
No product available!
No product available!
No product available!
No product available!
Odroid N2 2GB CoreELEC Edition is a ready-made kit that allows you to build a home entertainment center (media center), based on the ODROID N2 minicomputer with 2 GB of RAM. Odroid N2 2GB CoreELEC Edition
No product available!
No product available!
No product available!
EVALUATION BOARD AND MIDIUS MUSIC KEYPAD - PRINTED PLATES AND PROGRAMMED SYSTEM - PLATE PCB
No product available!
ROSA3D filament made of high-quality polycarbonate with Teflon. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PC+PTFE White