- Out-of-Stock
ROSA3D PET-G + CF filament for 3D printing with a diameter of 1.75 mm. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range of 240°C to 270°C, and the temperature of the bed during printing is in the range of 70°C to 90°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament.
The PET-G + CF filament has a very low shrinkage, is odorless and has very strong interlayer bonds. The material is characterized by a graphite, matte surface and a smooth - even satin structure and is relatively easy to print. Minimal shrinkage when printing allows you to print in an open device. The filament has a high chemical resistance, and the addition of carbon fiber increases its mechanical, thermal and impact strength, which makes the raw material universally applicable. The PET-G + CF filament is dedicated to printing structural elements and working machine parts, where higher strength and temperature resistance are required.
Attention!
The manufacturer recommends using a printing nozzle with a diameter of at least 0.5 mm.
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
ROSA3D filament made of high-quality PET-G granules with a small addition of carbon fibers. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G CarbonLook
No product available!
Digital oscilloscope equipped with a 7" TFT LCD display. It has two measurement channels with a 200 MHz bandwidth, a sampling rate of 1 GSa/s and a 14 Mpkt memory buffer. Siglent SDS1202X-E
No product available!
EDC Speaker cable 10 m, 2 x 0.35 mm red-black colour
No product available!
Tip 900M-T-0.5C beveled to the station AOYUE ZHAOXIN REPRO YIHUA PT WEP black from ZHAOXIN.
No product available!
Starter kit with STM32MP157A application microprocessor (combination of a typical processor with Cortex-A7 core and microcontroller with Cortex-M4 core). The system allows users to create applications using the STM32 MPU OpenSTLinux Distribution software for the main processor and the STM32CubeMP1 software for the coprocessor. STMicroelectronics STM32MP157A-DK1
No product available!
Starter kit with STM32MP157C application microprocessor (combination of a typical processor with Cortex-A7 core and microcontroller with Cortex-M4 core). The system allows users to create applications using the STM32 MPU OpenSTLinux Distribution software for the main processor and the STM32CubeMP1 software for the coprocessor. STMicroelectronics STM32MP157C-DK2
No product available!
Crimping tool for connectors 0.08-0.5 mm2 AWG 28-20. It has an adjustable downforce and an arm return lock mechanism. SN-01B
No product available!
Threaded hexagon spacer M2,5, sleeve length 11mm, female-female. The sleeve is made of brass
No product available!
HAT module with RFM95W 433 MHz system for LoRa / LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4075
No product available!
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047
No product available!
MP3 player module controlled by the I2C interface. It is based on a class D amplifier with a power of 1.4 W. The board has a 3.5 mm headphone output and an 8 Ω speaker connector. Audio files are saved on the microSD card. SparkFun DEV-15165
No product available!
Module with DRV2605L vibration motor controller and Y axis LRA motor. It allows you to add haptic feedback (vibration effect). SparkFun ROB-15181
No product available!
Module with a current and voltage sensor. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. SparkFun SEN-15176
No product available!
Module with ultrasonic distance sensor HC-SR04 with a range of up to 400 cm. It communicates via the I2C interface. SparkFun SEN-15171
No product available!
Module with transparent OLED display. It has a display area of 128 x 64 pixels, of which 128 x 56 pixels are completely transparent. I2C or SPI communication. SparkFun LCD-15173
No product available!
Module with a 1.3" black and white LCD display. It has a resolution of 144x168 pixels and a built-in SRAM memory. Communication is realized via the SPI interface. Waveshare 144x168, 1.3inch Bicolor LCD
No product available!
The housing for the Odroid XU4 minicomputer in blue. The housing protects the computer against dust and mechanical damage.
No product available!
ROSA3D filament made of high-quality PET-G granules with the addition of carbon fibers. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G + CF