- Out-of-Stock
The casing is made of plastic (black) with a built-in fan, designed for Raspberry Pi 4 model B, folded into latches without the use of tools or glue. The case provides access to all minicomputer connectors.
Attention!
The Raspberry Pi 4B minicomputer shown in the photo is not included in the set, it can be purchased separately.The fan has a plug that allows you to connect it directly to the GPIO pins of the Raspberry Pi 4 model B minicomputer B. The red wire (5V supply) should be connected to the 5V pin and the black wire to the GND pin (incorrect connection may damage the minicomputer!) As in the drawing below:

Data sheet
Manufacturer
Responsible person
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
The official case for the Raspberry Pi 4 model B in white and raspberry. Made of plastic. Allows easy access to the computer ports thanks to the removable top cover. The case has non-slip feet.
The official power supply for Raspberry Pi 4 model B with 5.1V output voltage and 3A current efficiency. It has a USB-C plug. Black power supply.
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Large heat sink in the form of a case covering the entire board with double fan. Designed for Raspberry Pi 4 minicomputers.
Large heat sink in the form of a case covering the entire board. Designed for Raspberry Pi 4 minicomputers.
AVT kit for self-assembly of a miniature 9V power module. AVT1913 / 9 B
No product available!
Assembled module of a miniature 9V power supply. AVT1913 / 9 C
No product available!
PCB board for miniature module power supply 5V, 9V, 12V, 15V, 24V. AVT1913 A
No product available!
AVT kit for self-assembly of a miniature 12V power supply module. AVT1913 / 12 B
No product available!
Assembled module of a miniature 12V power supply. AVT1913 / 12 C
No product available!
AVT kit for self-assembly of a miniature 24V power supply module. AVT1913 / 24 B
No product available!
Assembled module of a miniature 24V power supply. AVT1913 / 24 C
No product available!
PCBs and a programmed system for the construction of radar using ultrasonic waves. AVT5550 A +
No product available!
Black plastic wheels designed specifically for use with FEETECH FS90R micro continuous rotation servos. The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels sold in pairs. Pololu 2819
No product available!
Assembled radar using ultrasonic waves. AVT5550 C
No product available!
Printed circuit board for LED ring illuminator. AVT1918 A
No product available!
AVT kit for self-assembly LED ring illuminator. AVT1918 B
No product available!
No product available!
PCB board and programmed layout for a configurable 4-channel switch. AVT1916 A +
No product available!
AVT kit for self-assembly of a configurable 4-channel switch. AVT1916 B
No product available!
Assembled configurable 4-channel switch. AVT1916 C
No product available!
Six-part plastic case with fan for Raspberry Pi 4.